Shimano CRANKSET 2X8s Compatibility Guide
Quick Verdict
This Shimano CRANKSET 2X8s is a Shimano General crankset. It requires a 8-speed drivetrain and compatible components. For best performance, use with other SHIMANO components, though it is mechanically compatible with the parts listed below.
Note on Compatibility: These recommendations are based on mechanical standards and manufacturer specifications. While parts may be technically compatible, mixing brands or categories (e.g., Road and MTB) may affect shift quality or aesthetic cohesion.
Compatible shifters for CRANKSET 2X8s
20 total resultsRecommended Pairing
20General
Shimano
ASSIST SWITCH
Why it fits
- Uses cable shifting type
Shimano
DOWN TUBE SHIFT LEVER 8s
Why it fits
- Matches required 8-speed standard
- Uses cable shifting type
Shimano
DROPPER SEAT POST LEVER
Why it fits
- Uses cable shifting type
MTB / City
Shimano
BRAKE LEVER I-SPEC EV CLAMP BAND
Why it fits
- Uses cable shifting type
Shimano
DROPPER SEAT POST LEVER CLAMP BAND MOUNT
Why it fits
- Uses cable shifting type
Shimano
DROPPER SEAT POST LEVER I-SPEC EV
Why it fits
- Uses cable shifting type
Shimano
EZ FIRE PLUS SHIFT/BRAKE LEVER 2X FRONT SPEEDS
Why it fits
- Uses cable shifting type
Shimano
EZ FIRE PLUS SHIFT/BRAKE LEVER 8s
Why it fits
- Matches required 8-speed standard
- Uses cable shifting type
Shimano
EZ FIRE PLUS SHIFT/BRAKE LEVER FOR FRONT DOUBLE
Why it fits
- Uses cable shifting type
Shimano
EZ FIRE PLUS SHIFT/BRAKE LEVER FOR FRONT DOUBLE
Why it fits
- Uses cable shifting type
Shimano
HYDRAULIC DISC BRAKE 3 FINGER ALLOY LEVER
Why it fits
- Uses cable shifting type
Shimano
HYDRAULIC DISC BRAKE 3 FINGER LEVER
Why it fits
- Uses cable shifting type
Shimano
HYDRAULIC DISC BRAKE 3 FINGER STEEL LEVER
Why it fits
- Uses cable shifting type
Shimano
HYDRAULIC DISC BRAKE 3 FINGER STEEL LEVER
Why it fits
- Uses cable shifting type
Shimano
HYDRAULIC DISC BRAKE LEVER I-SPEC II 3-FINGER
Why it fits
- Uses cable shifting type
Shimano
HYDRAULIC DISC BRAKE LEVER SHORT REACH
Why it fits
- Uses cable shifting type
Shimano
REVOSHIFT SHIFT LEVER NON-DUAL SIS INDEX FRICTION TYPE
Why it fits
- Uses cable shifting type
Shimano
REVOSHIFT SHIFT LEVER SIS INDEX 8s
Why it fits
- Matches required 8-speed standard
- Uses cable shifting type
Road / Gravel
Shimano
Di2 REMOTE SATELLITE SHIFTER (CLIMBING SWITCH)
Why it fits
- Uses di2 shifting type
Compatible rear derailleurs for CRANKSET 2X8s
4 total resultsTechnically Compatible
4Matches required mechanical standards, but may not be the manufacturer-intended pairing.
Road
Shimano
CLARIS REAR DERAILLEUR MEDIUM CAGE 8s
Why it fits
- Matches required 8-speed standard
- Uses cable shifting type
- Uses shimano hg standard
Shimano
CLARIS REAR DERAILLEUR SHORT CAGE 8s
Why it fits
- Matches required 8-speed standard
- Uses cable shifting type
- Uses shimano hg standard
General
Shimano
ESSA REAR DERAILLEUR 8s
Why it fits
- Matches required 8-speed standard
- Uses cable shifting type
- Uses shimano hg standard
Shimano
TOURNEY REAR DERAILLEUR 7/8s
Why it fits
- Matches required 7/8-speed standard
- Uses cable shifting type
- Uses shimano hg standard
Frequently Asked Questions
What fits with Shimano CRANKSET 2X8s?
Shimano CRANKSET 2X8s is compatible with shifters, rear derailleurs that match its technical standards. Most importantly, it requires matching 8-speed components.
Can I use a higher or lower speed chain with Shimano CRANKSET 2X8s?
No, Shimano CRANKSET 2X8s requires a 8-speed chain. Chains for different speeds have different external widths and internal profiles, which will cause poor shifting or mechanical interference.
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderOur builder checks over 50 compatibility rules per component.