Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE Compatibility Guide
Quick Verdict
This Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE is a Shimano MTB rear derailleur. It requires a 11-speed drivetrain and compatible components. It is designed for di2 shifting systems. For best performance, use with other M9200 Series components, though it is mechanically compatible with the parts listed below.
Note on Compatibility: These recommendations are based on mechanical standards and manufacturer specifications. While parts may be technically compatible, mixing brands or categories (e.g., Road and MTB) may affect shift quality or aesthetic cohesion.
Compatible chains for XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE
5 total resultsTechnically Compatible
5Matches required mechanical standards, but may not be the manufacturer-intended pairing.
City / Trekking
General
Shimano
CN-HG601-11 LINKGLIDE, HG CHAIN 11s
Why it fits
- Matches required 11-speed standard
- Uses shimano linkglide standard
Shimano
CN-HG701-11 LINKGLIDE, HG CHAIN 11s
Why it fits
- Matches required 11-speed standard
- Uses shimano linkglide standard
Shimano
CN-LG500 LINKGLIDE CHAIN 10/11s
Why it fits
- Matches required 11-speed standard
- Uses shimano linkglide standard
Compatible cassettes for XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE
3 total resultsTechnically Compatible
3Matches required mechanical standards, but may not be the manufacturer-intended pairing.
City / Trekking
General
Shimano
LINKGLIDE CASSETTE 11s
Why it fits
- Matches required 11-speed standard
- Uses shimano linkglide standard
Shimano
LINKGLIDE CASSETTE 11s
Why it fits
- Matches required 11-speed standard
- Uses shimano linkglide standard
Compatible shifters for XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE
2 total resultsTechnically Compatible
2Matches required mechanical standards, but may not be the manufacturer-intended pairing.
Frequently Asked Questions
What fits with Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE?
Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE is compatible with chains, cassettes, shifters that match its technical standards. Most importantly, it requires matching 11-speed components.
Can I use a higher or lower speed chain with Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE?
No, Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE requires a 11-speed chain. Chains for different speeds have different external widths and internal profiles, which will cause poor shifting or mechanical interference.
Can I mix Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE with Road components?
While some mechanical standards (like cassette spacing at certain speeds) may overlap, Shimano XTR Di2 E-MTB REAR DERAILLEUR LONG CAGE 11s LINKGLIDE is optimized for MTB use. Mixing with Road parts often fails due to differing pull ratios and chainlines.
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderOur builder checks over 50 compatibility rules per component.