Shimano GRX Di2 FRONT DERAILLEUR 2X11s Compatibility Chart

Speeds11
Weight135g
ShiftingElectronic (Di2)

The rest of the Shimano GRX groupset

Other Shimano GRX parts with a compatibility chart of their own. They are listed because they share the groupset, not because they have been checked against this part. The verified matches are further down the page.

Only pairings verified on both parts’ specifications are listed. Confirm with the manufacturer before buying.

Cranksets for this front derailleur

8 total results

Recommended

1

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

GRX CRANKSET 2X11s RX810

Shimano

GRX CRANKSET 2X11s RX810

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline

Mechanically compatible

5

Every interface this pairing depends on was checked and matched, but the parts come from different ranges, so expect to confirm shift feel and finish yourself.

GRX CRANKSET 2X10s RX600

Shimano

GRX CRANKSET 2X10s RX600

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline
GRX CRANKSET 2X11s RX600

Shimano

GRX CRANKSET 2X11s RX600

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline
GRX CRANKSET 2X12s RX610

Shimano

GRX CRANKSET 2X12s RX610

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline
GRX CRANKSET 2X12s RX820

Shimano

GRX CRANKSET 2X12s RX820

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline
GRX-LIMITED CRANKSET 2X11s

Shimano

GRX-LIMITED CRANKSET 2X11s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline

Shares a standard

2

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

CUES 2-PIECE CRANKSET 2x10/9s

Shimano

CUES 2-PIECE CRANKSET 2x10/9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline
CUES CRANKSET HOLLOWTECH II 2x10/9s

Shimano

CUES CRANKSET HOLLOWTECH II 2x10/9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 47 mm chainline

Shifters that drive this derailleur

2 total results

Recommended

2

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

GRX Di2 DUAL CONTROL LEVER 11s

Shimano

GRX Di2 DUAL CONTROL LEVER 11s

What we checked
  • Both use di2 actuation
  • Both are Shimano drivetrain parts
GRX Di2 DUAL CONTROL LEVER 2X11s

Shimano

GRX Di2 DUAL CONTROL LEVER 2X11s

What we checked
  • Both are set up for 2x
  • Both use di2 actuation
  • Both are Shimano drivetrain parts

Frequently Asked Questions

What fits Shimano GRX Di2 FRONT DERAILLEUR 2X11s?

On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano GRX Di2 FRONT DERAILLEUR 2X11s?

No. Shimano GRX Di2 FRONT DERAILLEUR 2X11s is an 11-speed component and needs an 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.