Shimano MTB CRANKSET 2X8/7s (FC-M315-2) Compatibility Guide
Quick Verdict
This Shimano MTB CRANKSET 2X8/7s (FC-M315-2) is a Shimano General crankset. It requires a 7-speed drivetrain and compatible components. For best performance, use with other SHIMANO components, though it is mechanically compatible with the parts listed below.
Note on Compatibility: These recommendations are based on mechanical standards and manufacturer specifications. While parts may be technically compatible, mixing brands or categories (e.g., Road and MTB) may affect shift quality or aesthetic cohesion.
Compatible chainrings for MTB CRANKSET 2X8/7s (FC-M315-2)
20 total resultsRecommended Pairing
20General
Compatible bottom brackets for MTB CRANKSET 2X8/7s (FC-M315-2)
20 total resultsRecommended Pairing
20General
Compatible front derailleurs for MTB CRANKSET 2X8/7s (FC-M315-2)
7 total resultsTechnically Compatible
7Matches required mechanical standards, but may not be the manufacturer-intended pairing.
LTWOO
R2 Front Derailleur (FD-R0701-C)
Why it fits
- Matches required 7-speed standard
- Uses cable shifting type
Shimano
TOURNEY A070 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X7s
Why it fits
- Matches required 7-speed standard
- Uses cable shifting type
Shimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)
Why it fits
- Matches required 7-speed standard
- Uses cable shifting type
Shimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)
Why it fits
- Matches required 7-speed standard
- Uses cable shifting type
Shimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)
Why it fits
- Matches required 6/7/8-speed standard
- Uses cable shifting type
Shimano
TOURNEY TZ FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3(FRICTION)X8/7s (FD-TZ500-DS6)
Why it fits
- Matches required 7-speed standard
- Uses cable shifting type
Shimano
TOURNEY TZ FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3(FRICTION)X8/7s (FD-TZ510-DS6)
Why it fits
- Matches required 7-speed standard
- Uses cable shifting type
Compatible chains for MTB CRANKSET 2X8/7s (FC-M315-2)
5 total resultsRecommended Pairing
3
Shimano
CHAIN DEVICE D-TYPE MOUNT
Why it fits
- Uses shimano hg standard
Shimano
CHAIN DEVICE E-TYPE MOUNT
Why it fits
- Uses shimano hg standard
Shimano
CHAIN DEVICE ISCG05 MOUNT
Why it fits
- Uses shimano hg standard
Technically Compatible
2Matches required mechanical standards, but may not be the manufacturer-intended pairing.
Frequently Asked Questions
What fits with Shimano MTB CRANKSET 2X8/7s (FC-M315-2)?
Shimano MTB CRANKSET 2X8/7s (FC-M315-2) is compatible with chainrings, bottom brackets, front derailleurs, chains that match its technical standards. Most importantly, it requires matching 7-speed components.
Can I use a higher or lower speed chain with Shimano MTB CRANKSET 2X8/7s (FC-M315-2)?
No, Shimano MTB CRANKSET 2X8/7s (FC-M315-2) requires a 7-speed chain. Chains for different speeds have different external widths and internal profiles, which will cause poor shifting or mechanical interference.
Related compatibility guides
- Shimano MTB CRANKSET 2X11s (FC-MT700-2) Compatibility
- SRAM GX Eagle DUB Crankset Compatibility
- Shimano XTR CRANKSET 162 MM Q-FACTOR 48.8 MM CHAIN LINE 2X12s Compatibility
- Shimano CUES HOLLOWTECH II CRANKSET 1X11/10/9s Compatibility
- Shimano GRX CRANKSET 1X11s Compatibility
- SRAM Force AXS Wide Power Meter Crankset Compatibility
- Shimano DEORE XT E-BIKE HOLLOWTECH CRANK ARM SET M8100 Compatibility
- SRAM S150 Eagle Transmission Crankset Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderOur builder checks over 50 compatibility rules per component.