Shimano XTR Di2 REAR DERAILLEUR MEDIUM CAGE 12s Compatibility Chart

Speeds12

ShiftingElectronic (Di2)

The rest of the Shimano XTR groupset

Other Shimano XTR parts with a compatibility chart of their own. They are listed because they share the groupset, not because they have been checked against this part. The verified matches are further down the page.

Rear derailleurs

Cassettes

Shimano XTR HYPERGLIDE+ CASSETTE 12s M9100

Cranksets

Shifters

Bottom brackets

Front derailleurs

Only pairings verified on both parts’ specifications are listed. Confirm with the manufacturer before buying.

Cassettes for this derailleur

7 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Road

Shimano

105 HG CASSETTE 12s

What we checked

Both are 12-speed
Both are Shimano drivetrain parts
The cassette's 34T largest cog is within the derailleur's 45T maximum

Shimano

DURA-ACE HYPERGLIDE+ CASSETTE 12s

What we checked

Both are 12-speed
Both are Shimano drivetrain parts

Shimano

ULTEGRA HYPERGLIDE+ CASSETTE 12s (CS-R8100-12)

What we checked

Both are 12-speed
Both are Shimano drivetrain parts

Shimano

ULTEGRA HYPERGLIDE+ CASSETTE 12s (CS-R8101-12)

What we checked

Both are 12-speed
Both are Shimano drivetrain parts

MTB

Shimano

DEORE HYPERGLIDE+ CASSETTE 12s

What we checked

Both are 12-speed
Both are Shimano drivetrain parts

Shimano

DEORE HYPERGLIDE+ CASSETTE 12s

What we checked

Both are 12-speed
Both are Shimano drivetrain parts

General

Shimano

HG CASSETTE 12s

What we checked

Both are 12-speed
Both are Shimano drivetrain parts
The cassette's 36T largest cog is within the derailleur's 45T maximum

Chains for this derailleur

11 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Shimano

CN-M6100 HYPERGLIDE+ CHAIN 12s

What we checked

Both are 12-speed

Shimano

CN-M7100 HYPERGLIDE+ CHAIN 12s

What we checked

Both are 12-speed

Shimano

CN-M8100 HYPERGLIDE+ CHAIN 12s

What we checked

Both are 12-speed

Shimano

CN-M9100 HYPERGLIDE+ CHAIN 12s

What we checked

Both are 12-speed

KMC

DLC 12

What we checked

Both are 12-speed

KMC

e12

What we checked

Both are 12-speed

FSA

K-FORCE LIGHT MTB 12 SPEED CHAIN

What we checked

Both are 12-speed

KMC

WAX DLC 12

What we checked

Both are 12-speed

KMC

WAX TT 12

What we checked

Both are 12-speed

KMC

WAX X12

What we checked

Both are 12-speed

KMC

X12

What we checked

Both are 12-speed

Shifters that drive this derailleur

2 total results

Mechanically compatible

Every interface this pairing depends on was checked and matched, but the parts come from different ranges, so expect to confirm shift feel and finish yourself.

Shimano

DEORE Di2 SHIFTING SWITCH (SW-M6250-R)

What we checked

Both use di2 actuation
Both are Shimano drivetrain parts

Shimano

DEORE XT Di2 SHIFTING SWITCH (SW-M8250-IR)

What we checked

Both use di2 actuation
Both are Shimano drivetrain parts

Frequently Asked Questions

What fits Shimano XTR Di2 REAR DERAILLEUR MEDIUM CAGE 12s?

On this page we list cassettes for this derailleur, chains for this derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano XTR Di2 REAR DERAILLEUR MEDIUM CAGE 12s?

No. Shimano XTR Di2 REAR DERAILLEUR MEDIUM CAGE 12s is a 12-speed component and needs a 12-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.