SRAM RED eTap Rear Derailleur Compatibility Guide
Quick Verdict
This SRAM RED eTap Rear Derailleur is a SRAM Road / Gravel rear derailleur. It requires a 11-speed drivetrain and compatible components. It is designed for axs shifting systems. For best performance, use with other RED components, though it is mechanically compatible with the parts listed below.
Note on Compatibility: These recommendations are based on mechanical standards and manufacturer specifications. While parts may be technically compatible, mixing brands or categories (e.g., Road and MTB) may affect shift quality or aesthetic cohesion.
Compatible chains for RED eTap Rear Derailleur
8 total resultsRecommended Pairing
1
SRAM
RED 22 Chain
Why it fits
- Matches required 11-speed standard
- Uses standard standard
Technically Compatible
7Matches required mechanical standards, but may not be the manufacturer-intended pairing.
City / Trekking
General
SRAM
PC-1110 Chain
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
PC-1130 Chain
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
PC-1170 Chain
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
PowerLock Chain Connector 11-Speed
Why it fits
- Matches required 11-speed standard
- Uses standard standard
MTB
SRAM
PC-X1 Chain
Why it fits
- Matches required 11-speed standard
- Uses standard standard
Compatible shifters for RED eTap Rear Derailleur
8 total resultsTechnically Compatible
8Matches required mechanical standards, but may not be the manufacturer-intended pairing.
General
SRAM
AXS Pod Controller
Why it fits
- Uses axs shifting type
SRAM
AXS Pod Controller Rocker Paddle
Why it fits
- Uses axs shifting type
SRAM
AXS Pod Ultimate Controller
Why it fits
- Uses axs shifting type
SRAM
AXS Rocker Controller
Why it fits
- Uses axs shifting type
SRAM
eTap AXS Wireless Blips
Why it fits
- Uses axs shifting type
SRAM
RockShox AXS Controller
Why it fits
- Uses axs shifting type
Compatible cassettes for RED eTap Rear Derailleur
7 total resultsTechnically Compatible
7Matches required mechanical standards, but may not be the manufacturer-intended pairing.
City / Trekking
General
SRAM
PG-1130 Cassette
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
PG-1170 Cassette
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
XG-1150 FULL PIN Cassette
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
XG-1175 FULL PIN Cassette
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
XG-1195 X-DOME Cassette
Why it fits
- Matches required 11-speed standard
- Uses standard standard
SRAM
XG-1199 X-DOME Cassette
Why it fits
- Matches required 11-speed standard
- Uses standard standard
Frequently Asked Questions
What fits with SRAM RED eTap Rear Derailleur?
SRAM RED eTap Rear Derailleur is compatible with chains, shifters, cassettes that match its technical standards. Most importantly, it requires matching 11-speed components.
Can I use a higher or lower speed chain with SRAM RED eTap Rear Derailleur?
No, SRAM RED eTap Rear Derailleur requires a 11-speed chain. Chains for different speeds have different external widths and internal profiles, which will cause poor shifting or mechanical interference.
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderOur builder checks over 50 compatibility rules per component.