microSHIFT Bar End Shifter - SRAM MTB 1x12

Shifter

No Image

Specifications

Manufacturer
microSHIFT
Name
Bar End Shifter - SRAM MTB 1x12
Side
Right
Rear Speeds
12
Drivetrain Brand
Other
Shifting Type
Cable

Compatibility

microSHIFT Bar End Shifter - SRAM MTB 1x12 is a microSHIFT shifter. It is a 12-speed component. It uses Cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Rear derailleurs this shifter drives8

AX Rear Derailleur (RD-A1210-L-A)Shares a standard

LTWOO

AX Rear Derailleur (RD-A1210-L-A)

  • Both are 12-speed
  • Both use cable actuation
AX Rear Derailleur (RD-A1210-L)Shares a standard

LTWOO

AX Rear Derailleur (RD-A1210-L)

  • Both are 12-speed
  • Both use cable actuation
EGR Rear Derailleur (RD-EG1201-M-A)Shares a standard

LTWOO

EGR Rear Derailleur (RD-EG1201-M-A)

  • Both are 12-speed
  • Both use cable actuation
EGR Rear Derailleur (RD-EG1301-M-A)Shares a standard

LTWOO

EGR Rear Derailleur (RD-EG1301-M-A)

  • Both are 12-speed
  • Both use cable actuation
GRT Rear Derailleur (RD-GR1210-L-A)Shares a standard

LTWOO

GRT Rear Derailleur (RD-GR1210-L-A)

  • Both are 12-speed
  • Both use cable actuation
GRT Rear Derailleur (RD-GR1211-L-A)Shares a standard

LTWOO

GRT Rear Derailleur (RD-GR1211-L-A)

  • Both are 12-speed
  • Both use cable actuation
RX Rear Derailleur (RD-R1212-M-A)Shares a standard

LTWOO

RX Rear Derailleur (RD-R1212-M-A)

  • Both are 12-speed
  • Both use cable actuation
TX Rear Derailleur (RD-T1211-L-A)Shares a standard

LTWOO

TX Rear Derailleur (RD-T1211-L-A)

  • Both are 12-speed
  • Both use cable actuation

Frequently Asked Questions

What fits microSHIFT Bar End Shifter - SRAM MTB 1x12?

On this page we list rear derailleurs this shifter drives. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Does microSHIFT Bar End Shifter - SRAM MTB 1x12 work with electronic shifting like Di2 or AXS?

No. microSHIFT Bar End Shifter - SRAM MTB 1x12 is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.