Shimano CUES HOLLOWTECH II CRANKSET 2X11s U6000

Crankset

CUES HOLLOWTECH II CRANKSET 2X11s U6000

Specifications

Manufacturer
Shimano
Name
CUES HOLLOWTECH II CRANKSET 2X11s U6000
Series
U6000
MPN
FC-U6010-2
Groupset
CUES
Rear Speeds
11
Front Speeds (chainrings)
2[1]
Drivetrain Brand
Shimano
Chainring Sizes
46, 32[2]
Crank Length (mm)
170, 175
Spindle Interface
24mm
Chainring Mount
4-bolt Asymmetric 110bcd[2]
BCD
110
Chainline (mm)
48.8[2]
Compatible Chain Standards
Shimano LinkGlide, Shimano HG (Hyperglide)[2]
Sources
  1. [1] AI-extracted, not yet checked against a named source (added 27 Feb 2026): Front Speeds (chainrings)
  2. [2] productinfo.shimano.com, checked 7 Aug 2026: Chainring Sizes, Chainring Mount, Chainline (mm), Compatible Chain Standards

Compatibility

Shimano CUES HOLLOWTECH II CRANKSET 2X11s U6000 is a Shimano crankset. It is an 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Chainrings that fit this crankset20

Chainring 30T for FC-U6000-2Recommended

Shimano

Chainring 30T for FC-U6000-2

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 32T for FC-U6010-2Recommended

Shimano

Chainring 32T for FC-U6010-2

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 40T for FC-U6000-1Recommended

Shimano

Chainring 40T for FC-U6000-1

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 42T for FC-U6000-1Recommended

Shimano

Chainring 42T for FC-U6000-1

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 46T for FC-U6000-2Recommended

Shimano

Chainring 46T for FC-U6000-2

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 46T for FC-U6010-2Recommended

Shimano

Chainring 46T for FC-U6010-2

  • Both use the 4-bolt asymmetric 110bcd interface
1x megatooth alloyMechanically compatible

FSA

1x megatooth alloy

  • Both are 110mm BCD
2x chainringMechanically compatible

FSA

2x chainring

  • Both are 110mm BCD
Chainring 34T for FC-4700Mechanically compatible

Shimano

Chainring 34T for FC-4700

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-R3000Mechanically compatible

Shimano

Chainring 34T for FC-R3000

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-R3000(with CG)Mechanically compatible

Shimano

Chainring 34T for FC-R3000(with CG)

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-R7000(Black)Mechanically compatible

Shimano

Chainring 34T for FC-R7000(Black)

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-R7000(Silver)Mechanically compatible

Shimano

Chainring 34T for FC-R7000(Silver)

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-R7100Mechanically compatible

Shimano

Chainring 34T for FC-R7100

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-R8000Mechanically compatible

Shimano

Chainring 34T for FC-R8000

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-RS510Mechanically compatible

Shimano

Chainring 34T for FC-RS510

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 34T for FC-RS520Mechanically compatible

Shimano

Chainring 34T for FC-RS520

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 36T for FC-4700Mechanically compatible

Shimano

Chainring 36T for FC-4700

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 36T for FC-R7000(Black)Mechanically compatible

Shimano

Chainring 36T for FC-R7000(Black)

  • Both use the 4-bolt asymmetric 110bcd interface
Chainring 36T for FC-R7000(Silver)Mechanically compatible

Shimano

Chainring 36T for FC-R7000(Silver)

  • Both use the 4-bolt asymmetric 110bcd interface

Front derailleurs for this crankset15

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10sRecommended

Shimano

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10sRecommended

Shimano

CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X11/10sRecommended

Shimano

CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X11/10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U6000Recommended

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U6000

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 2X9s (FD-M3120-M)Mechanically compatible

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 2X9s (FD-M3120-M)

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALIVIO FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 2X9sMechanically compatible

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALIVIO FRONT DERAILLEUR SIDE SWING (E-TYPE MOUNT) 2X9sMechanically compatible

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (E-TYPE MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9sMechanically compatible

Shimano

ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9sMechanically compatible

Shimano

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X10/9sMechanically compatible

Shimano

CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X10/9sMechanically compatible

Shimano

CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9sMechanically compatible

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U8000Mechanically compatible

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U8000

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9sMechanically compatible

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X8/7/6sMechanically compatible

Shimano

TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X8/7/6s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts

Bottom brackets for this crankset20

386EVO ABEC-3 BB for 24mm (Shimano) CranksMechanically compatible

Wheels Manufacturing

386EVO ABEC-3 BB for 24mm (Shimano) Cranks

  • Both use a 24mm spindle
386EVO Angular Contact BB for 24mm (Shimano) CranksMechanically compatible

Wheels Manufacturing

386EVO Angular Contact BB for 24mm (Shimano) Cranks

  • Both use a 24mm spindle
878Mechanically compatible

Token

878

  • Both use a 24mm spindle
BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)Mechanically compatible

Wheels Manufacturing

BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)Mechanically compatible

Wheels Manufacturing

BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)Mechanically compatible

Wheels Manufacturing

BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)Mechanically compatible

Wheels Manufacturing

BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30ARMechanically compatible

Token

BB30AR

  • Both use a 24mm spindle
BB3724Mechanically compatible

Token

BB3724

  • Both use a 24mm spindle
BB38624PSMechanically compatible

Token

BB38624PS

  • Both use a 24mm spindle
BB386PSMechanically compatible

Token

BB386PS

  • Both use a 24mm spindle
BB4124PSMechanically compatible

Token

BB4124PS

  • Both use a 24mm spindle
BB46BR24Mechanically compatible

Token

BB46BR24

  • Both use a 24mm spindle
BB47R24Mechanically compatible

Token

BB47R24

  • Both use a 24mm spindle
BB47V24Mechanically compatible

Token

BB47V24

  • Both use a 24mm spindle
BB841PSMechanically compatible

Token

BB841PS

  • Both use a 24mm spindle
BB841T-41Mechanically compatible

Token

BB841T-41

  • Both use a 24mm spindle
BB841T-42Mechanically compatible

Token

BB841T-42

  • Both use a 24mm spindle
BB841T-46Mechanically compatible

Token

BB841T-46

  • Both use a 24mm spindle
BB86 Bottom Bracket (Shimano 24mm)Mechanically compatible

Cybrei

BB86 Bottom Bracket (Shimano 24mm)

  • Both use a 24mm spindle

Chains for this crankset20

CN-LG500 LINKGLIDE CHAIN 10/11s Recommended

Shimano

CN-LG500 LINKGLIDE CHAIN 10/11s

  • Both are 11-speed
CN-HG601-11 LINKGLIDE, HG CHAIN 11sMechanically compatible

Shimano

CN-HG601-11 LINKGLIDE, HG CHAIN 11s

  • Both are 11-speed
CN-HG701-11 LINKGLIDE, HG CHAIN 11sMechanically compatible

Shimano

CN-HG701-11 LINKGLIDE, HG CHAIN 11s

  • Both are 11-speed
DLC 11Mechanically compatible

KMC

DLC 11

  • Both are 11-speed
e11Mechanically compatible

KMC

e11

  • Both are 11-speed
eGlideMechanically compatible

KMC

eGlide

  • Both are 11-speed
K-FORCE LIGHT 11 SPEED CHAINMechanically compatible

FSA

K-FORCE LIGHT 11 SPEED CHAIN

  • Both are 11-speed
K-FORCE LIGHT MTB 11 SPEED CHAINMechanically compatible

FSA

K-FORCE LIGHT MTB 11 SPEED CHAIN

  • Both are 11-speed
K-Force WE 11 SPEED CHAINMechanically compatible

FSA

K-Force WE 11 SPEED CHAIN

  • Both are 11-speed
PC-1110 ChainMechanically compatible

SRAM

PC-1110 Chain

  • Both are 11-speed
PC-1130 ChainMechanically compatible

SRAM

PC-1130 Chain

  • Both are 11-speed
PC-1170 ChainMechanically compatible

SRAM

PC-1170 Chain

  • Both are 11-speed
PC-X1 ChainMechanically compatible

SRAM

PC-X1 Chain

  • Both are 11-speed
RED 22 ChainMechanically compatible

SRAM

RED 22 Chain

  • Both are 11-speed
SF11 E-BIKE 11 SPEED CHAINMechanically compatible

FSA

SF11 E-BIKE 11 SPEED CHAIN

  • Both are 11-speed
Team Issue ChainMechanically compatible

FSA

Team Issue Chain

  • Both are 11-speed
WAX DLC 11Mechanically compatible

KMC

WAX DLC 11

  • Both are 11-speed
WAX TT 11Mechanically compatible

KMC

WAX TT 11

  • Both are 11-speed
WAX X11Mechanically compatible

KMC

WAX X11

  • Both are 11-speed
WAX X11ELMechanically compatible

KMC

WAX X11EL

  • Both are 11-speed

Frequently Asked Questions

What fits Shimano CUES HOLLOWTECH II CRANKSET 2X11s U6000?

On this page we list chainrings that fit this crankset, front derailleurs for this crankset, bottom brackets for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano CUES HOLLOWTECH II CRANKSET 2X11s U6000?

No. Shimano CUES HOLLOWTECH II CRANKSET 2X11s U6000 is an 11-speed component and needs an 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.