microSHIFT Front Derailleur 3x9 for 20" Wheels
Front Derailleur
Specifications
- Manufacturer
- microSHIFT
- Name
- Front Derailleur 3x9 for 20" Wheels
- Rear Speeds
- 9
- Front Speeds
- 3
- Drivetrain Brand
- Other
- Shifting Type
- Cable
- Mount Type
- Band-On
- Chainline (mm)
- 45
- Total Capacity (T)
- 22
- Weight (g)
- 123
Compatibility
microSHIFT Front Derailleur 3x9 for 20" Wheels is a microSHIFT front derailleur. It is a 9-speed component. It uses Cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Cranksets for this front derailleur13
Shares a standardOverfast
Aero Carbon Crank Assembly
- Both are Overfast drivetrain parts
- Both are built around a 44 mm chainline
Shares a standardOverfast
Aero Cranks w/ Spider
- Both are Overfast drivetrain parts
- Both are built around a 44 mm chainline
Shares a standardCybrei
Carbon Crank Assembly (24mm Spindle)
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shares a standardCybrei
Carbon Crank Assembly (DUB Spindle)
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shares a standardCybrei
Carbon Crank Assembly w/ Alloy or Carbon Spider (24mm Spindle)
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shares a standardCybrei
Carbon Crank Assembly w/ Alloy or Carbon Spider (DUB Spindle)
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shares a standardCybrei
Carbon Crank Assembly w/ Powermeter Spider (24mm Spindle)
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shares a standardCybrei
Carbon Crank Assembly w/ Powermeter Spider (DUB Spindle)
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shares a standardOverfast
Light Carbon Crank Assembly
- Both are Overfast drivetrain parts
- Both are built around a 44 mm chainline
Shares a standardOverfast
Light Cranks w/ Spider
- Both are Overfast drivetrain parts
- Both are built around a 44 mm chainline
Shares a standardMagene
QED Crankset
- Both are Magene drivetrain parts
- Both are built around a 45 mm chainline
Shares a standardMagene
QED P325 Crank Based Powermeter Crankset
- Both are Magene drivetrain parts
- Both are built around a 45 mm chainline
Shares a standardCybrei
Ultra Carbon Crank Assembly
- Both are Cybrei drivetrain parts
- Both are built around a 44.5 mm chainline
Shifters that drive this derailleur20
microSHIFT
Bar End Shifters - MTB 2/3x10
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x11
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 (SL-D10)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 for Tiagra 4700 (SL-D10B)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x8 (SL-D08)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x9 (SL-D09)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Drop Bar Shifters 3x7 (SB-R373)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Drop Bar Shifters 3x7 (SB-R473)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Shifter - Left MTB for Double/Triple
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Shifters MTB 2/3x10 (SL-M10)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Shifters MTB 2/3x11 (SL-M11)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x6 - TS38
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x7 - TS38
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x7 - TS71
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x8 - TS38
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x8 - TS71
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x9 - TS38
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 3x9 - TS71
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Twist Shifters 3x6 (MS25-6)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Twist Shifters 3x6 (MS29-6)
- Both are set up for 3x
- Both use cable actuation
Frequently Asked Questions
What fits microSHIFT Front Derailleur 3x9 for 20" Wheels?
On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with microSHIFT Front Derailleur 3x9 for 20" Wheels?
No. microSHIFT Front Derailleur 3x9 for 20" Wheels is a 9-speed component and needs a 9-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does microSHIFT Front Derailleur 3x9 for 20" Wheels work with electronic shifting like Di2 or AXS?
No. microSHIFT Front Derailleur 3x9 for 20" Wheels is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.