Cinelli Gazzetta Track
Frame

Specifications
- Manufacturer
- Cinelli
- Name
- Gazzetta Track
- MPN
- 00GZT2LS505BGZ
- Discipline
- Road
- Material
- Steel
- Head Tube
- Straight
- Upper S.H.I.S
- EC34/28.6
- Lower S.H.I.S
- EC34/30
- Max Tyre Width (mm)
- 25
- Seatpost Diameter (mm)
- 27.2
- Wheel Sizes
- 700c / 29"
- Frame Size
- 50, 52, 55, 59
- Front Axle Standard
- 9 × 100 mm (QR)
- Rear Axle Standard
- 9 × 120 mm (QR, track)
- BB Standard
- BSA THREADED
- BB Thread Type
- BSA (English)
- Rim Brake Mount
- Single Bolt
- Cable Routing
- External
- Weight (g)
- 2000
Compatibility
Cinelli Gazzetta Track is a Cinelli road frame. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Bottom brackets for this frame shell20
RecommendedToken
878
- Both are bsa threaded bottom bracket shells
RecommendedToken
BB29BSA
- Both are bsa threaded bottom bracket shells
RecommendedFSA
BB386 crank to BSA frame thread Ceramic bearings
- Both are bsa threaded bottom bracket shells
RecommendedFSA
BB392 crank to BSA frame
- Both are bsa threaded bottom bracket shells
RecommendedToken
BB392BSA
- Both are bsa threaded bottom bracket shells
RecommendedCybrei
BSA Bottom Bracket (Shimano 24mm)
- Both are bsa threaded bottom bracket shells
RecommendedCybrei
BSA Bottom Bracket (SRAM DUB)
- Both are bsa threaded bottom bracket shells
RecommendedShimano
CARTRIDGE BOTTOM BRACKET
- Both are bsa threaded bottom bracket shells
RecommendedShimano
DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT800)
- Both are bsa threaded bottom bracket shells
RecommendedShimano
DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT801)
- Both are bsa threaded bottom bracket shells
RecommendedPraxis
DUB-BSA
- Both are bsa threaded bottom bracket shells
RecommendedToken
ISO Square Taper (BSA / ISO)
- Both are bsa threaded bottom bracket shells
RecommendedToken
JIS Square Taper (BSA / JIS)
- Both are bsa threaded bottom bracket shells
RecommendedPraxis
M24 – BSA THREADED
- Both are bsa threaded bottom bracket shells
RecommendedFSA
Mega Exo Comet crank to 68/73mm frame
- Both are bsa threaded bottom bracket shells
RecommendedFSA
MegaExo Comet crank to BSA 100mm
- Both are bsa threaded bottom bracket shells
RecommendedFSA
MegaExo crank
- Both are bsa threaded bottom bracket shells
RecommendedFSA
MegaExo Gamma Drive crank to BSA frame
- Both are bsa threaded bottom bracket shells
RecommendedFSA
MegaExo GOSSAMER crank to BSA frame Di2 compatible
- Both are bsa threaded bottom bracket shells
RecommendedFSA
MegaExo K-Force crank to BSA 68/73mm frame
- Both are bsa threaded bottom bracket shells
Brake calipers this frame mounts10
RecommendedFSA
Direct-Mount road
- Both use a single bolt rim brake mount
RecommendedFSA
GOSSAMER PRO ROAD
- Both use a single bolt rim brake mount
RecommendedFSA
K-FORCE ROAD
- Both use a single bolt rim brake mount
RecommendedFSA
K-FORCE ROAD
- Both use a single bolt rim brake mount
RecommendedFSA
K-FORCE ROAD
- Both use a single bolt rim brake mount
RecommendedFSA
K-FORCE ROAD
- Both use a single bolt rim brake mount
RecommendedFSA
K-FORCE ROAD
- Both use a single bolt rim brake mount
RecommendedFSA
K-FORCE ROAD
- Both use a single bolt rim brake mount
RecommendedShimano
DURA-ACE DUAL-PIVOT BRAKE CALIPER R9100
- Both use a single bolt rim brake mount
RecommendedShimano
ULTEGRA DUAL-PIVOT BRAKE CALIPER R8000
- Both use a single bolt rim brake mount
Forks with a matching steerer and wheel size20
Shares a standardENVE
Adventure Fork
- Both are built for 700c wheels
Shares a standardENVE
All-Road In-Route Fork 47mm
- Both are built for 700c wheels
Shares a standardENVE
All-Road In-Route Fork 51mm
- Both are built for 700c wheels
Shares a standardENVE
AR Disc Fork
- Both are built for 700c wheels
Shares a standardENVE
Disc Brake Fork
- Both are built for 700c wheels
Shares a standardENVE
Gravel Disc Fork 47mm
- Both are built for 700c wheels
Shares a standardENVE
Gravel Disc Fork 50mm
- Both are built for 700c wheels
Shares a standardENVE
Gravel In-Route Fork 53mm
- Both are built for 700c wheels
Shares a standardENVE
Gravel In-Route Fork 55mm
- Both are built for 700c wheels
Shares a standardCane Creek
Helm Coil 29
- Both are built for 700c wheels
Shares a standardCane Creek
Helm MKII
- Both are built for 700c wheels
Shares a standardCane Creek
Helm MKII 29
- Both are built for 700c wheels
Shares a standardCane Creek
Helm MKII Air 29
- Both are built for 700c wheels
Shares a standardColumbus
Minimal
- Both are built for 700c wheels
Shares a standardLightCarbon
New Gravel Fork
- Both are built for 700c wheels
Shares a standardColumbus
Pista Leggera
- Both are built for 700c wheels
Shares a standardMRP
Ribbon LT 29"
- Both are built for 700c wheels
Shares a standardMRP
Ribbon LT Coil 29"
- Both are built for 700c wheels
Shares a standardMRP
Ribbon SL Rally 29"
- Both are built for 700c wheels
Shares a standardENVE
Rim Brake Fork
- Both are built for 700c wheels
Frequently Asked Questions
What fits Cinelli Gazzetta Track?
On this page we list bottom brackets for this frame shell, brake calipers this frame mounts, forks with a matching steerer and wheel size. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I mix Cinelli Gazzetta Track with MTB components?
Cinelli Gazzetta Track is recorded as a road component. Some standards do carry across (cassette spacing at a given speed count, for instance), but cable pull ratio and chainline frequently differ between road and MTB groups, so check the specific pairing rather than assuming it carries over.