Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s
Crankset

Specifications
- Manufacturer
- Shimano
- Name
- HYPERDRIVE TRAIL MTB CRANKSET 3X9s
- MPN
- FC-MT101
- Rear Speeds
- 9
- Front Speeds (chainrings)
- 3[1]
- Drivetrain Brand
- Shimano
- Chainring Sizes
- 40, 30, 22[2]
- Crank Length (mm)
- 170, 175
- Spindle Interface
- Square Taper JIS
- Chainring Mount
- Riveted Non Replaceable[3]
- Chainline (mm)
- 50
- Compatible Chain Standards
- Shimano HG (Hyperglide)
- Sources
- [1] AI-extracted, not yet checked against a named source (added 9 Feb 2026): Front Speeds (chainrings)
- [2] modernbike.com, checked 26 Aug 2026: Chainring Sizes
- [3] bike.shimano.com, checked 18 Aug 2026: Chainring Mount
Compatibility
Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s is a Shimano crankset. It is a 9-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Bottom brackets for this crankset10
Mechanically compatibleShimano
CARTRIDGE BOTTOM BRACKET
- Both use a square taper jis spindle
Mechanically compatibleToken
JIS Square Taper (BSA / JIS)
- Both use a square taper jis spindle
Mechanically compatibleToken
JIS Square Taper (ITA / JIS)
- Both use a square taper jis spindle
Mechanically compatibleShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)
- Both use a square taper jis spindle
Mechanically compatibleShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN101)
- Both use a square taper jis spindle
Mechanically compatibleShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)
- Both use a square taper jis spindle
Mechanically compatibleShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)
- Both use a square taper jis spindle
Mechanically compatibleShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN300)
- Both use a square taper jis spindle
Mechanically compatibleShimano
TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKET
- Both use a square taper jis spindle
Mechanically compatibleShimano
TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASE
- Both use a square taper jis spindle
Front derailleurs for this crankset20
Mechanically compatibleShimano
ACERA FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 3X9s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) FOR TREKKING 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE FRONT DERAILLEUR SIDE SWING (HIGH CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE FRONT DERAILLEUR SIDE SWING (LOW CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE FRONT DERAILLEUR SIDE SWING (MIDDLE CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Mechanically compatibleShimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Chains for this crankset8
Mechanically compatibleShimano
CN-HG93 ALFINE SUPER NARROW CHAIN 9s
- Both are 9-speed
Mechanically compatibleKMC
e9
- Both are 9-speed
Mechanically compatibleSRAM
PC-951 Chain
- Both are 9-speed
Mechanically compatibleSRAM
PC-971 Chain
- Both are 9-speed
Mechanically compatibleFSA
Team Issue Chain
- Both are 9-speed
Mechanically compatibleKMC
X9
- Both are 9-speed
Mechanically compatibleKMC
X9SL
- Both are 9-speed
Mechanically compatibleShimano
CN-HG53 9 Speed Chain
- Both are 9-speed
Frequently Asked Questions
What fits Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s?
On this page we list bottom brackets for this crankset, front derailleurs for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s?
No. Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s is a 9-speed component and needs a 9-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.