microSHIFT Marvo Front Derailleur 2x8 (FD-M382B)
Front Derailleur
Specifications
- Manufacturer
- microSHIFT
- Name
- Marvo Front Derailleur 2x8 (FD-M382B)
- Series
- Mezzo
- MPN
- FD-M382B
- Rear Speeds
- 8
- Front Speeds
- 2
- Drivetrain Brand
- Other
- Shifting Type
- Cable
- Mount Type
- Band-On
- Chainline (mm)
- 48.8
- Total Capacity (T)
- 14
- Weight (g)
- 167
Compatibility
microSHIFT Marvo Front Derailleur 2x8 (FD-M382B) is a microSHIFT front derailleur. It is an 8-speed component. It uses Cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Cranksets for this front derailleur4
Shares a standardFSA
AFTERBURNER MEGAEXO MODULAR CRANKSET 2X
- Both are set up for 2x
- Both are FSA drivetrain parts
Shares a standardFSA
AFTERBURNER MODULAR CRANKSET 2018
- Both are set up for 2x
- Both are FSA drivetrain parts
Shares a standardFSA
K-FORCE BB392EVO modular crankset 2X
- Both are set up for 2x
- Both are FSA drivetrain parts
Shares a standardFSA
V-DRIVE modular crankset 2X
- Both are set up for 2x
- Both are FSA drivetrain parts
Shifters that drive this derailleur20
microSHIFT
Thumb Tap Shifters 2x8 - TS39
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Thumb Tap Shifters 2x9 - TS39
- Both are set up for 2x
- Both use cable actuation
microSHIFT
ADVENT Xpress Shifter 2x9 Left (SL-M819-L)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifter - Left Road for Double/Triple
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - 2/3x8
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - 2/3x9
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x10
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x11
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2/3x10
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2/3x11
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2x12
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Tiagra 4700 2/3x10
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Drop Bar Shifters 2x10 for Tiagra 4700 (SB-R502B)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Drop Bar Shifters 2x11 (SB-R512B-BK)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Xpress Plus Shifters 2x10 for Tiagra 4700 (SL-R860B-2)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Xpress Plus Shifters 2x11 (SL-R861-2)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Xpress Shifters 2x11 Indicator (SL-R761-2)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 (SL-D10)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 for Tiagra 4700 (SL-D10B)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x8 (SL-D08)
- Both are set up for 2x
- Both use cable actuation
Frequently Asked Questions
What fits microSHIFT Marvo Front Derailleur 2x8 (FD-M382B)?
On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with microSHIFT Marvo Front Derailleur 2x8 (FD-M382B)?
No. microSHIFT Marvo Front Derailleur 2x8 (FD-M382B) is an 8-speed component and needs an 8-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does microSHIFT Marvo Front Derailleur 2x8 (FD-M382B) work with electronic shifting like Di2 or AXS?
No. microSHIFT Marvo Front Derailleur 2x8 (FD-M382B) is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.