microSHIFT Marvo Front Derailleur 3x9 (FD-M43)
Front Derailleur
Specifications
- Manufacturer
- microSHIFT
- Name
- Marvo Front Derailleur 3x9 (FD-M43)
- Series
- Marvo
- MPN
- FD-M43
- Rear Speeds
- 9
- Front Speeds
- 3
- Drivetrain Brand
- Other
- Shifting Type
- Cable
- Mount Type
- Band-On
- Total Capacity (T)
- 22
- Weight (g)
- 150
Compatibility
microSHIFT Marvo Front Derailleur 3x9 (FD-M43) is a microSHIFT front derailleur. It is a 9-speed component. It uses Cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Shifters that drive this derailleur20
microSHIFT
Marvo Xpress Shifters 2/3x9 (SL-M859)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Marvo Xpress Shifters 3x9 Indicator (SL-M759-3)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifter - Left Road for Double/Triple
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - 2/3x8
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - 2/3x9
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x10
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x11
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2/3x10
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2/3x11
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Bar End Shifters - Tiagra 4700 2/3x10
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 (SL-D10)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 for Tiagra 4700 (SL-D10B)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x8 (SL-D08)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x9 (SL-D09)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Drop Bar Shifters 3x7 (SB-R373)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Drop Bar Shifters 3x7 (SB-R473)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
Estes Thumb Tap Left Shifter 3x Triple Indicator (TS200-3L)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
R10 Drop Bar Shifters 3x10 (SB-R403K-BK)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
R10 Xpress Shifters 3x10 Indicator (SL-R760-3-BK)
- Both are set up for 3x
- Both use cable actuation
microSHIFT
R10 Xpress Shifters 3x10 Indicator Silver (SL-R760-3)
- Both are set up for 3x
- Both use cable actuation
Frequently Asked Questions
What fits microSHIFT Marvo Front Derailleur 3x9 (FD-M43)?
On this page we list shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with microSHIFT Marvo Front Derailleur 3x9 (FD-M43)?
No. microSHIFT Marvo Front Derailleur 3x9 (FD-M43) is a 9-speed component and needs a 9-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does microSHIFT Marvo Front Derailleur 3x9 (FD-M43) work with electronic shifting like Di2 or AXS?
No. microSHIFT Marvo Front Derailleur 3x9 (FD-M43) is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.