microSHIFT Mezzo Front Derailleur 2x7/8 Trekking (FD-T202)

Front Derailleur

No Image

Specifications

Manufacturer
microSHIFT
Name
Mezzo Front Derailleur 2x7/8 Trekking (FD-T202)
Series
Mezzo
MPN
FD-T202
Rear Speeds
7, 8
Front Speeds
2
Drivetrain Brand
Other
Shifting Type
Cable
Mount Type
Band-On
Chainline (mm)
48.8
Total Capacity (T)
16
Weight (g)
140

Compatibility

microSHIFT Mezzo Front Derailleur 2x7/8 Trekking (FD-T202) is a microSHIFT front derailleur. It uses Cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Cranksets for this front derailleur8

Shifters that drive this derailleur20

🚲Recommended

microSHIFT

Thumb Tap Shifters 2x8 - TS39

  • Both are set up for 2x
  • Both use cable actuation
🚲Recommended

microSHIFT

Thumb Tap Shifters 2x9 - TS39

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

ADVENT Xpress Shifter 2x9 Left (SL-M819-L)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifter - Left Road for Double/Triple

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - 2/3x8

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - 2/3x9

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - MTB 2/3x10

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - MTB 2/3x11

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - Road 2/3x10

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - Road 2/3x11

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - Road 2x12

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Bar End Shifters - Tiagra 4700 2/3x10

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Centos Drop Bar Shifters 2x10 for Tiagra 4700 (SB-R502B)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Centos Drop Bar Shifters 2x11 (SB-R512B-BK)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Centos Xpress Plus Shifters 2x10 for Tiagra 4700 (SL-R860B-2)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Centos Xpress Plus Shifters 2x11 (SL-R861-2)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Centos Xpress Shifters 2x11 Indicator (SL-R761-2)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Downtube Shifters 2/3x10 (SL-D10)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Downtube Shifters 2/3x10 for Tiagra 4700 (SL-D10B)

  • Both are set up for 2x
  • Both use cable actuation
🚲Mechanically compatible

microSHIFT

Downtube Shifters 2/3x8 (SL-D08)

  • Both are set up for 2x
  • Both use cable actuation

Frequently Asked Questions

What fits microSHIFT Mezzo Front Derailleur 2x7/8 Trekking (FD-T202)?

On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Does microSHIFT Mezzo Front Derailleur 2x7/8 Trekking (FD-T202) work with electronic shifting like Di2 or AXS?

No. microSHIFT Mezzo Front Derailleur 2x7/8 Trekking (FD-T202) is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.