Shimano XTR BRAKE LEVER XC I-SPEC EV CLAMP BAND
Shifter
Specifications
- Manufacturer
- Shimano
- Name
- XTR BRAKE LEVER XC I-SPEC EV CLAMP BAND
- Series
- M9100
- MPN
- BL-M9100
- Groupset
- XTR
- Drivetrain Brand
- Shimano
- Brake Type
- Hydraulic Disc[1]
- Shifting Type
- None
- Mount Type
- Flat Bar
- Sources
- [1] AI-extracted, not yet checked against a named source (added 12 Feb 2026): Brake Type
Compatibility
Shimano XTR BRAKE LEVER XC I-SPEC EV CLAMP BAND is a Shimano shifter. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
XTR M9100 Groupset6
A groupset is designed and tested as one system, so these are the most reliable match. Other compatible parts are listed below.
RecommendedShimano
XTR SHIFT LEVER RIGHT 12s
- Ships in the XTR M9100 Groupset
RecommendedShimano
XTR REAR DERAILLEUR LONG CAGE 12s
- Ships in the XTR M9100 Groupset
RecommendedShimano
XTR CRANKSET 174 MM Q-FACTOR 55 MM CHAIN LINE 1X12s
- Ships in the XTR M9100 Groupset
RecommendedShimano
XTR HYPERGLIDE+ CASSETTE 12s M9100
- Ships in the XTR M9100 Groupset
RecommendedShimano
CN-M9100 HYPERGLIDE+ CHAIN 12s
- Ships in the XTR M9100 Groupset
RecommendedShimano
XTR 2-PISTON BRAKE CALIPER M9100
- Ships in the XTR M9100 Groupset
Handlebars with a matching shifter mount type (not clamp fit)20
Mechanically compatibleFSA
AFTERBURNER alloy flat
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
AFTERBURNER alloy riser
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
AFTERBURNER alloy riser
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
AFTERBURNER Flat
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
AFTERBURNER Riser
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
AFTERBURNER RISER 18
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
Afterburner riser 30
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleCrust Bikes
Blitz Bar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleLightCarbon
Carbon MTB AM Enduro Riser Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleLightCarbon
Carbon MTB Enduro All Mountain Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleLightCarbon
Carbon MTB Lightest Flat Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleLightCarbon
Carbon MTB Rise Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleLightCarbon
Carbon MTB Rise Handlebar XC03
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleRace Face
Chester Handlebar - 31.8
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleRitchey
Classic 10D Flat Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleRitchey
Classic El Camino Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleRitchey
Classic Flat Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleRitchey
Classic Kyote Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleRitchey
Classic Rizer Handlebar
- A flat-bar shifter mounts to this kind of bar
Mechanically compatibleFSA
COMET ALLOY 35 RISER 15
- A flat-bar shifter mounts to this kind of bar
Frequently Asked Questions
What fits Shimano XTR BRAKE LEVER XC I-SPEC EV CLAMP BAND?
On this page we list handlebars with a matching shifter mount type (not clamp fit). Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Is Shimano XTR BRAKE LEVER XC I-SPEC EV CLAMP BAND compatible with rim brakes?
No. Shimano XTR BRAKE LEVER XC I-SPEC EV CLAMP BAND is built for hydraulic disc systems. The mounting standards and wheel/frame interfaces for disc brakes are different and cannot be mixed.