Cinelli Zydeco Washboard

Frame

Zydeco Washboard

Specifications

Manufacturer
Cinelli
Name
Zydeco Washboard
MPN
00ZYA5CU510FDS
Discipline
Gravel
Material
Aluminum
Head Tube
Tapered
Upper S.H.I.S
IS52/28.6
Lower S.H.I.S
IS52/40
Max Tyre Width (mm)
45
Max Fork Travel (mm)
0
Seatpost Diameter (mm)
27.2
Wheel Sizes
700c / 29"
Frame Size
49, 51, 54, 56, 59
Front Axle Standard
12 × 100 mm
Rear Axle Standard
12 × 142 mm
Rear Derailleur Mount
UDH
BB Standard
BSA THREADED
BB Thread Type
BSA (English)
Disc Brake Mount
Flat Mount
Di2 Compatible
No
Cable Routing
Internal
Weight (g)
1800

Compatibility

Cinelli Zydeco Washboard is a Cinelli gravel frame. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Brake calipers this frame mounts20

2-PISTON FLAT MOUNT BRAKE CALIPERRecommended

Shimano

2-PISTON FLAT MOUNT BRAKE CALIPER

  • Both use a flat mount disc brake
Apex 1 Hydraulic Disc BrakeRecommended

SRAM

Apex 1 Hydraulic Disc Brake

  • Both use a flat mount disc brake
Apex Disc BrakeRecommended

SRAM

Apex Disc Brake

  • Both use a flat mount disc brake
Brake Caliper (BR-R03A-140R)Recommended

LTWOO

Brake Caliper (BR-R03A-140R)

  • Both use a flat mount disc brake
Brake Caliper (BR-R03B-140R)Recommended

LTWOO

Brake Caliper (BR-R03B-140R)

  • Both use a flat mount disc brake
Brake Caliper (BR-R04A-160F)Recommended

LTWOO

Brake Caliper (BR-R04A-160F)

  • Both use a flat mount disc brake
Brake Caliper (BR-R04B-160F)Recommended

LTWOO

Brake Caliper (BR-R04B-160F)

  • Both use a flat mount disc brake
Brake Caliper (BR-R06A-140F)Recommended

LTWOO

Brake Caliper (BR-R06A-140F)

  • Both use a flat mount disc brake
Brake Caliper (BR-R06B-140F)Recommended

LTWOO

Brake Caliper (BR-R06B-140F)

  • Both use a flat mount disc brake
Brake Caliper (BR-R07A-160R)Recommended

LTWOO

Brake Caliper (BR-R07A-160R)

  • Both use a flat mount disc brake
Brake Caliper (BR-R07B-160R)Recommended

LTWOO

Brake Caliper (BR-R07B-160R)

  • Both use a flat mount disc brake
EVO X2 FLATMOUNTRecommended

Hope

EVO X2 FLATMOUNT

  • Both use a flat mount disc brake
Force Aero Disc BrakeRecommended

SRAM

Force Aero Disc Brake

  • Both use a flat mount disc brake
RA7800 Hydraulic Brake Caliper Set (Road/Gravel)Recommended

WheelTop

RA7800 Hydraulic Brake Caliper Set (Road/Gravel)

  • Both use a flat mount disc brake
Red Aero Disc BrakeRecommended

SRAM

Red Aero Disc Brake

  • Both use a flat mount disc brake
Rival 1 HRD DiscRecommended

SRAM

Rival 1 HRD Disc

  • Both use a flat mount disc brake
Rival Aero Disc BrakeRecommended

SRAM

Rival Aero Disc Brake

  • Both use a flat mount disc brake
RX4 SL FMRecommended

Hope

RX4 SL FM

  • Both use a flat mount disc brake
105 FRONT BRAKE CALIPERRecommended

Shimano

105 FRONT BRAKE CALIPER

  • Both use a flat mount disc brake
105 HYDRAULIC DISC BRAKE FRONT CALIPERRecommended

Shimano

105 HYDRAULIC DISC BRAKE FRONT CALIPER

  • Both use a flat mount disc brake

Bottom brackets for this frame shell20

878Recommended

Token

878

  • Both are bsa threaded bottom bracket shells
BB29BSARecommended

Token

BB29BSA

  • Both are bsa threaded bottom bracket shells
BB386 crank to BSA frame thread Ceramic bearingsRecommended

FSA

BB386 crank to BSA frame thread Ceramic bearings

  • Both are bsa threaded bottom bracket shells
BB392 crank to BSA frameRecommended

FSA

BB392 crank to BSA frame

  • Both are bsa threaded bottom bracket shells
BB392BSARecommended

Token

BB392BSA

  • Both are bsa threaded bottom bracket shells
BSA Bottom Bracket (Shimano 24mm)Recommended

Cybrei

BSA Bottom Bracket (Shimano 24mm)

  • Both are bsa threaded bottom bracket shells
BSA Bottom Bracket (SRAM DUB)Recommended

Cybrei

BSA Bottom Bracket (SRAM DUB)

  • Both are bsa threaded bottom bracket shells
CARTRIDGE BOTTOM BRACKETRecommended

Shimano

CARTRIDGE BOTTOM BRACKET

  • Both are bsa threaded bottom bracket shells
DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT800)Recommended

Shimano

DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT800)

  • Both are bsa threaded bottom bracket shells
DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT801)Recommended

Shimano

DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT801)

  • Both are bsa threaded bottom bracket shells
DUB-BSARecommended

Praxis

DUB-BSA

  • Both are bsa threaded bottom bracket shells
ISO Square Taper (BSA / ISO)Recommended

Token

ISO Square Taper (BSA / ISO)

  • Both are bsa threaded bottom bracket shells
JIS Square Taper (BSA / JIS)Recommended

Token

JIS Square Taper (BSA / JIS)

  • Both are bsa threaded bottom bracket shells
M24 – BSA THREADEDRecommended

Praxis

M24 – BSA THREADED

  • Both are bsa threaded bottom bracket shells
Mega Exo Comet crank to 68/73mm frameRecommended

FSA

Mega Exo Comet crank to 68/73mm frame

  • Both are bsa threaded bottom bracket shells
MegaExo Comet crank to BSA 100mmRecommended

FSA

MegaExo Comet crank to BSA 100mm

  • Both are bsa threaded bottom bracket shells
MegaExo crankRecommended

FSA

MegaExo crank

  • Both are bsa threaded bottom bracket shells
MegaExo Gamma Drive crank to BSA frameRecommended

FSA

MegaExo Gamma Drive crank to BSA frame

  • Both are bsa threaded bottom bracket shells
MegaExo GOSSAMER crank to BSA frame Di2 compatibleRecommended

FSA

MegaExo GOSSAMER crank to BSA frame Di2 compatible

  • Both are bsa threaded bottom bracket shells
MegaExo K-Force crank to BSA 68/73mm frameRecommended

FSA

MegaExo K-Force crank to BSA 68/73mm frame

  • Both are bsa threaded bottom bracket shells

Forks with a matching steerer and wheel size20

Allroad ForkRecommended

Deda Elementi

Allroad Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Cutthroat Carbon ForkRecommended

Salsa

Cutthroat Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Firestarter Carbon ForkRecommended

Salsa

Firestarter Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Road In-Route Fork 43mmRecommended

ENVE

Road In-Route Fork 43mm

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Road In-Route Fork 50mmRecommended

ENVE

Road In-Route Fork 50mm

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Waxwing Carbon ForkRecommended

Salsa

Waxwing Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Carbon Gravel Fork No.9 MCX+Recommended

Whisky Parts Co

Carbon Gravel Fork No.9 MCX+

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
CXD ForkRecommended

Kinesis

CXD Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
DC37 Disc ForkRecommended

Kinesis

DC37 Disc Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Fork Aithein CarbonRecommended

Kinesis

Fork Aithein Carbon

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Fork Aithein Columbus BlackRecommended

Kinesis

Fork Aithein Columbus Black

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
🚲Recommended

Wound Up

Gravel X Disc 1.5" Tapered

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
GTD Disc ForkRecommended

Kinesis

GTD Disc Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
GTD ForkRecommended

Kinesis

GTD Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
MCX Monstercross Fork Monster crossRecommended

Whisky Parts Co

MCX Monstercross Fork Monster cross

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
No.7 CX Disc Cyclocross ForkRecommended

Whisky Parts Co

No.7 CX Disc Cyclocross Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
No.7 RD 12MMRecommended

Whisky Parts Co

No.7 RD 12MM

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
No.7 Tapered Road ForkRecommended

Whisky Parts Co

No.7 Tapered Road Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
No.9 15mm Mountain ForkRecommended

Whisky Parts Co

No.9 15mm Mountain Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
No.9 CXLR ForkRecommended

Whisky Parts Co

No.9 CXLR Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels

Frequently Asked Questions

What fits Cinelli Zydeco Washboard?

On this page we list brake calipers this frame mounts, bottom brackets for this frame shell, forks with a matching steerer and wheel size. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.