Shimano CRANKSET OCTALINK 3X10s Compatibility Guide
Quick Verdict
Shimano CRANKSET OCTALINK 3X10s is a Shimano crankset. It is a 10-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.
Chainrings that fit this crankset
20 total resultsRecommended
20Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
General

FSA
1x steel chainring 3/32
What we checked
- Both are 104mm BCD

FSA
1x steel megatooth
What we checked
- Both are 104mm BCD

FSA
1x steel megatooth
What we checked
- Both are 104mm BCD

FSA
1x steel megatooth
What we checked
- Both are 104mm BCD

FSA
1x steel megatooth
What we checked
- Both are 104mm BCD

FSA
alloy Magatooth Chainring 1x
What we checked
- Both are 104mm BCD

FSA
alloy Megatooth Chainring 1x
What we checked
- Both are 104mm BCD

FSA
alloy Megatooth Chainring 1x
What we checked
- Both are 104mm BCD

FSA
Alloy megatooth chainring 1x
What we checked
- Both are 104mm BCD

Shimano
Chainring 34T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE70-B
What we checked
- Both are 104mm BCD

Shimano
Chainring 34T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80
What we checked
- Both are 104mm BCD

Shimano
Chainring 34T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B
What we checked
- Both are 104mm BCD

Shimano
Chainring 36T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE70-12-B
What we checked
- Both are 104mm BCD

Shimano
Chainring 36T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B
What we checked
- Both are 104mm BCD

Shimano
Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/CR-ET600
What we checked
- Both are 104mm BCD

Shimano
Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80
What we checked
- Both are 104mm BCD

Shimano
Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B
What we checked
- Both are 104mm BCD

Shimano
Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (with Double CG)/SM-CRE70
What we checked
- Both are 104mm BCD
MTB

Shimano
Chainring 32T for FC-M610/FC-T611/FC-T521/SHIMANO DEORE trekking
What we checked
- Both are 104mm BCD

Shimano
Chainring 36T for FC-M610/FC-T6010/FC-T611/FC-T521/SHIMANO DEORE trekking
What we checked
- Both are 104mm BCD
Front derailleurs for this crankset
20 total resultsShares a standard
20One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.
MTB

Shimano
ACERA FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 3X9s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS6)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS3)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS6)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) FOR TREKKING 3X10s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE FRONT DERAILLEUR SIDE SWING (HIGH CLAMP BAND MOUNT) 3X10s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE FRONT DERAILLEUR SIDE SWING (LOW CLAMP BAND MOUNT) 3X10s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE FRONT DERAILLEUR SIDE SWING (MIDDLE CLAMP BAND MOUNT) 3X10s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 3X10s
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L3)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L6)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-3)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-6)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline
General

Shimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline

Shimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L6)
What we checked
- Both are set up for 3x
- Both are Shimano drivetrain parts
- Both are built around a 50 mm chainline
Chains for this crankset
4 total resultsRecommended
4Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
MTB

Shimano
CN-HG54 DEORE MTB CHAIN 10s
What we checked
- Both are 10-speed
General

Shimano
CN-HG95 HG-X CHAIN 10s
What we checked
- Both are 10-speed

FSA
K-FORCE LIGHT 10 SPEED CHAIN
What we checked
- Both are 10-speed

FSA
Team Issue Chain
What we checked
- Both are 10-speed
Frequently Asked Questions
What fits Shimano CRANKSET OCTALINK 3X10s?
On this page we list chainrings that fit this crankset, front derailleurs for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano CRANKSET OCTALINK 3X10s?
No. Shimano CRANKSET OCTALINK 3X10s is a 10-speed component and needs a 10-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Related compatibility guides
- Shimano DEORE XT CRANKSET 1X11s Compatibility
- Shimano DEORE XT CRANKSET 48.8 MM CHAIN LINE 2X12s Compatibility
- Shimano CUES CRANKSET 2X11/10/9s Compatibility
- Shimano MTB CRANKSET 2X8/7s (FC-M315-2) Compatibility
- Shimano DEORE CRANKSET 1X12s Compatibility
- Shimano TIAGRA CRANKSET 2x11s Compatibility
- Shimano XTR CRANKSET 168 MM Q-FACTOR 52 MM CHAIN LINE 1X12s Compatibility
- Shimano CUES 2-PIECE CRANKSET 1X11/10/9s (FC-U6000-1) Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.