Shimano GRX Di2 FRONT DERAILLEUR 2X11s Compatibility Guide
Quick Verdict
Shimano GRX Di2 FRONT DERAILLEUR 2X11s is a Shimano front derailleur. It is a 11-speed component. It uses di2 shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.
Cranksets for this front derailleur
8 total resultsRecommended
6Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
Shimano
GRX CRANKSET 2X11s RX810
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shimano
GRX CRANKSET 2X10s RX600
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shimano
GRX CRANKSET 2X11s RX600
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shimano
GRX CRANKSET 2X12s RX610
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shimano
GRX CRANKSET 2X12s RX820
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shimano
GRX-LIMITED CRANKSET 2X11s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shares a standard
2One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.
Shimano
CUES 2-PIECE CRANKSET 2x10/9s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shimano
CUES CRANKSET HOLLOWTECH II 2x10/9s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 47 mm chainline
Shifters that drive this derailleur
2 total resultsRecommended
2Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
Shimano
GRX Di2 DUAL CONTROL LEVER 11s
What we checked
- Both are set up for 2x
- Both use di2 actuation
- Both are Shimano drivetrain parts
Shimano
GRX Di2 DUAL CONTROL LEVER 2X11s
What we checked
- Both are set up for 2x
- Both use di2 actuation
- Both are Shimano drivetrain parts
Frequently Asked Questions
What fits Shimano GRX Di2 FRONT DERAILLEUR 2X11s?
On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano GRX Di2 FRONT DERAILLEUR 2X11s?
No. Shimano GRX Di2 FRONT DERAILLEUR 2X11s is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Related compatibility guides
- Shimano SORA FRONT DERAILLEUR (CLAMP BAND MOUNT) 3X9s Compatibility
- Shimano CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s Compatibility
- Shimano 105 Di2 FRONT DERAILLEUR 2X12s Compatibility
- Shimano CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s Compatibility
- Shimano DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s Compatibility
- Shimano ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3) Compatibility
- Shimano ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9s Compatibility
- Shimano DURA-ACE FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.