Shimano MTB CRANKSET 2X8/7s (FC-TY501-2) Compatibility Guide

Quick Verdict

Shimano MTB CRANKSET 2X8/7s (FC-TY501-2) is a Shimano crankset. It is a 7-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds7

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Bottom brackets for this crankset

10 total results

Recommended

10

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

CARTRIDGE BOTTOM BRACKET

Shimano

CARTRIDGE BOTTOM BRACKET

What we checked
  • Both use a square taper jis spindle
JIS Square Taper (BSA / JIS)

Token

JIS Square Taper (BSA / JIS)

What we checked
  • Both use a square taper jis spindle
JIS Square Taper (ITA / JIS)

Token

JIS Square Taper (ITA / JIS)

What we checked
  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)

What we checked
  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN101)

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN101)

What we checked
  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)

What we checked
  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)

What we checked
  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300)

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300)

What we checked
  • Both use a square taper jis spindle
TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKET

Shimano

TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKET

What we checked
  • Both use a square taper jis spindle
TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASE

Shimano

TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASE

What we checked
  • Both use a square taper jis spindle

Front derailleurs for this crankset

4 total results

Recommended

4

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U6000

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U6000

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U8000

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U8000

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9s

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X8/7/6s

Shimano

TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X8/7/6s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline

Frequently Asked Questions

What fits Shimano MTB CRANKSET 2X8/7s (FC-TY501-2)?

On this page we list bottom brackets for this crankset, front derailleurs for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano MTB CRANKSET 2X8/7s (FC-TY501-2)?

No. Shimano MTB CRANKSET 2X8/7s (FC-TY501-2) is a 7-speed component and needs a 7-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.