Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s Compatibility Guide
Quick Verdict
Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s is a Shimano front derailleur. It is a 11-speed component. It uses cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.
Shifters that drive this derailleur
20 total resultsRecommended
20Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
MTB / City

Shimano
SLX SHIFT LEVER LEFT I-SPEC B 2/3X11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
SLX SHIFT LEVER LEFT I-SPEC II 2/3X11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
ACERA SHIFT LEVER LEFT 2X9s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
ALIVIO SHIFT LEVER LEFT 2X9s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CLARIS LEFT SHIFT LEVER FLAT BAR ROAD 2X8s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CLARIS LEFT SHIFT/BRAKE LEVER FLAT BAR ROAD 2X8s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CLARIS RIGHT SHIFT LEVER FLAT BAR ROAD 8s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CUES MONO LEFT SHIFTER CLAMP BAND 2X11/10s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CUES MONO LEFT SHIFTER CLAMP BAND 2X11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts
Road / Gravel

Shimano
105 DUAL CONTROL LEVER 2X12s (Left)
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
105 DUAL CONTROL LEVER 2X12s (Right)
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
105 DUAL CONTROL LEVER RIM BRAKE 11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
105 DUAL CONTROL LEVER RIM BRAKE 2X11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
105 HYDRAULIC DISC BRAKE DUAL CONTROL LEVER 11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
105 HYDRAULIC DISC BRAKE DUAL CONTROL LEVER 2X11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
105 HYDRAULIC DISC BRAKE DUAL CONTROL LEVER FOR SMALL HANDS 2X11s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CLARIS DUAL CONTROL LEVER 2X8s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CLARIS DUAL CONTROL LEVER 8s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CUES MECHANICAL DUAL CONTROL LEVER 9s
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CUES MECHANICAL DUAL CONTROL LEVER FOR DOUBLE
What we checked
- Both are set up for 2x
- Both use cable actuation
- Both are Shimano drivetrain parts
Cranksets for this front derailleur
10 total resultsRecommended
7Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
General

Shimano
CRANKSET FOR 135/142 MM O.L.D. FRAMES 2X12s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
MTB CRANKSET 2X11s (FC-MT700-2)
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline
MTB

Shimano
DEORE CRANKSET FOR 135/142 MM O.L.D. FRAMES 2X10s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
DEORE CRANKSET FOR 135/142 MM O.L.D. FRAMES 2X11s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
DEORE XT CRANKSET 48.8 MM CHAIN LINE 2X12s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
SLX MTB CRANKSET 172 MM Q-FACTOR 48.8 MM CHAIN LINE 2X12s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
XTR CRANKSET 162 MM Q-FACTOR 48.8 MM CHAIN LINE 2X12s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline
Shares a standard
3One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Shimano
CUES 2-PIECE CRANKSET 2X11/10/9s U4000
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
CUES 2-PIECE CRANKSET 2X11/10/9s U6000
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline

Shimano
CUES CRANKSET 2X11/10/9s
What we checked
- Both are set up for 2x
- Both are Shimano drivetrain parts
- Both are built around a 48.8 mm chainline
Frequently Asked Questions
What fits Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s?
On this page we list shifters that drive this derailleur, cranksets for this front derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s?
No. Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s work with electronic shifting like Di2 or AXS?
No. Shimano SLX FRONT DERAILLEUR TOP SWING (LOW CLAMP BAND MOUNT) 2X11s is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.
Related compatibility guides
- Shimano SORA FRONT DERAILLEUR (CLAMP BAND MOUNT) 3X9s Compatibility
- Shimano CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s Compatibility
- Shimano 105 Di2 FRONT DERAILLEUR 2X12s Compatibility
- Shimano CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s Compatibility
- Shimano DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s Compatibility
- Shimano ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3) Compatibility
- Shimano ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9s Compatibility
- Shimano DURA-ACE FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.