Shimano TIAGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2x11s Compatibility Chart

Speeds11

The rest of the Shimano Tiagra groupset

Other Shimano Tiagra parts with a compatibility chart of their own. They are listed because they share the groupset, not because they have been checked against this part. The verified matches are further down the page.

Shifters

Cranksets

Rear derailleurs

Front derailleurs

Only pairings verified on both parts’ specifications are listed. Confirm with the manufacturer before buying.

Cranksets for this front derailleur

16 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Road

Shimano

TIAGRA CRANKSET 2x11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

105 CRANKSET 2X11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

105 CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 44.5 mm chainline

Shimano

CLARIS CRANKSET 2X8s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 16T ring spread is within this derailleur's 16T capacity

Shimano

CLARIS CRANKSET WITH CHAIN GUARD 2X8s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 16T ring spread is within this derailleur's 16T capacity

Shimano

DURA-ACE CRANKSET 2X11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 44.5 mm chainline

Shimano

DURA-ACE CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 44.5 mm chainline

Shimano

SORA CRANKSET 2X9s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 16T ring spread is within this derailleur's 16T capacity

Shimano

TIAGRA CRANKSET 2X10s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

ULTEGRA CRANKSET 2X11s (FC-08)

What we checked

Both are Shimano drivetrain parts
Both are built around a 44.5 mm chainline

Shimano

ULTEGRA CRANKSET 2X11s (FC-R8000)

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

ULTEGRA CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 44.5 mm chainline

General

Shimano

CRANKSET 2X11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 44.5 mm chainline
The 16T ring spread is within this derailleur's 16T capacity

Shimano

CRANKSET 2X8s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

TOURNEY CRANKSET 2X8/7s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 16T ring spread is within this derailleur's 16T capacity

Frequently Asked Questions

What fits Shimano TIAGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2x11s?

On this page we list cranksets for this front derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano TIAGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2x11s?

No. Shimano TIAGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2x11s is an 11-speed component and needs an 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.