SRAM GX 2x10 Rear Derailleur Compatibility Guide

Quick Verdict

SRAM GX 2x10 Rear Derailleur is a SRAM rear derailleur. It is a 10-speed component. It uses cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds10
Weight302g
Shiftingcable

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Chains for this derailleur

6 total results

Recommended

4

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

PC-1031 Chain

SRAM

PC-1031 Chain

What we checked
  • Both are 10-speed
  • Both use the standard standard
PC-1051 Chain

SRAM

PC-1051 Chain

What we checked
  • Both are 10-speed
  • Both use the standard standard
PC-1071 Chain

SRAM

PC-1071 Chain

What we checked
  • Both are 10-speed
  • Both use the standard standard
PC-1091R Chain

SRAM

PC-1091R Chain

What we checked
  • Both are 10-speed
  • Both use the standard standard

Mechanically compatible

2

Every interface this pairing depends on was checked and matched, but the parts come from different ranges, so expect to confirm shift feel and finish yourself.

K-FORCE LIGHT 10 SPEED CHAIN

FSA

K-FORCE LIGHT 10 SPEED CHAIN

What we checked
  • Both are 10-speed
Team Issue Chain

FSA

Team Issue Chain

What we checked
  • Both are 10-speed

Shifters that drive this derailleur

3 total results

Recommended

3

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

MTB / City

GX 2x10 EXACT ACTUATION Trigger Shifters

SRAM

GX 2x10 EXACT ACTUATION Trigger Shifters

What we checked
  • Both are 10-speed
  • Both use cable actuation
  • Both are SRAM drivetrain parts
X5 Trigger Shifters

SRAM

X5 Trigger Shifters

What we checked
  • Both are 10-speed
  • Both use cable actuation
  • Both are SRAM drivetrain parts

General

SL-500 Aero Shifter Set 11-Speed

SRAM

SL-500 Aero Shifter Set 11-Speed

What we checked
  • Both are 10-speed
  • Both use cable actuation
  • Both are SRAM drivetrain parts

Cassettes this derailleur can wrap

2 total results

Recommended

2

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

PG-1030 Cassette

SRAM

PG-1030 Cassette

What we checked
  • Both are 10-speed
  • Both are SRAM drivetrain parts
  • Both use the standard standard
PG-1050 Cassette

SRAM

PG-1050 Cassette

What we checked
  • Both are 10-speed
  • Both are SRAM drivetrain parts
  • Both use the standard standard

Frequently Asked Questions

What fits SRAM GX 2x10 Rear Derailleur?

On this page we list chains for this derailleur, shifters that drive this derailleur, cassettes this derailleur can wrap. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with SRAM GX 2x10 Rear Derailleur?

No. SRAM GX 2x10 Rear Derailleur is a 10-speed component and needs a 10-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Does SRAM GX 2x10 Rear Derailleur work with electronic shifting like Di2 or AXS?

No. SRAM GX 2x10 Rear Derailleur is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.