SRAM X4 Rear Derailleur Compatibility Guide
Quick Verdict
SRAM X4 Rear Derailleur is a SRAM rear derailleur. It is a 7-speed component. It uses cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.
Shifters that drive this derailleur
2 total resultsRecommended
2Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
SRAM
GX DH X-ACTUATION Trigger Shifter
What we checked
- Both are 7-speed
- Both use cable actuation
- Both are SRAM drivetrain parts
SRAM
X01 DH X-ACTUATION Trigger Shifter
What we checked
- Both are 7-speed
- Both use cable actuation
- Both are SRAM drivetrain parts
Cassettes this derailleur can wrap
4 total resultsRecommended
4Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
SRAM
PG-720 Cassette (CS-PG-720-A1)
What we checked
- Both are 7-speed
- Both are SRAM drivetrain parts
- Both use the standard standard
SRAM
PG-720 Cassette (CS-PG-720-A2)
What we checked
- Both are 7-speed
- Both are SRAM drivetrain parts
- Both use the standard standard
SRAM
PG-730 Cassette
What we checked
- Both are 7-speed
- Both are SRAM drivetrain parts
- Both use the standard standard
SRAM
XG-795 MINI BLOCK Cassette
What we checked
- Both are 7-speed
- Both are SRAM drivetrain parts
- Both use the standard standard
Frequently Asked Questions
What fits SRAM X4 Rear Derailleur?
On this page we list shifters that drive this derailleur, cassettes this derailleur can wrap. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with SRAM X4 Rear Derailleur?
No. SRAM X4 Rear Derailleur is a 7-speed component and needs a 7-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does SRAM X4 Rear Derailleur work with electronic shifting like Di2 or AXS?
No. SRAM X4 Rear Derailleur is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.
Related compatibility guides
- Shimano ALIVIO REAR DERAILLEUR 9s Compatibility
- Shimano XTR Di2 DERAILLEUR LONG CAGE 11s Compatibility
- Shimano DEORE XT Di2 REAR DERAILLEUR MEDIUM CAGE11s Compatibility
- Shimano SLX REAR DERAILLEUR LONG CAGE 3X10s Compatibility
- Shimano TOURNEY REAR DERAILLEUR 1X6/7s Compatibility
- Shimano DEORE XT REAR DERAILLEUR 1X12s (RD-M8100-GS) Compatibility
- Shimano XTR REAR DERAILLEUR LONG CAGE 2X12s Compatibility
- Shimano SLX REAR DERAILLEUR 2X12s Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.