SRAM XX DH Transmission Derailleur Compatibility Guide

Quick Verdict

SRAM XX DH Transmission Derailleur is a SRAM rear derailleur. It is a 7-speed component. It uses axs shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds7
Weight426g
Shiftingaxs

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Cassettes this derailleur can wrap

1 total results

Recommended

1

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

XX DH Transmission Cassette

SRAM

XX DH Transmission Cassette

What we checked
  • Both are 7-speed
  • Both are SRAM drivetrain parts
  • Both use the sram eagle standard

Frequently Asked Questions

What fits SRAM XX DH Transmission Derailleur?

On this page we list cassettes this derailleur can wrap. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with SRAM XX DH Transmission Derailleur?

No. SRAM XX DH Transmission Derailleur is a 7-speed component and needs a 7-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.