Shimano Chainring 28T for FC-M9100-2/FC-M9120-B2
Chainring
Specifications
- Manufacturer
- Shimano
- Name
- Chainring 28T for FC-M9100-2/FC-M9120-B2
- Series
- M9100
- MPN
- Y1X228000
- Teeth (T)
- 28
- Drivetrain Brand
- Shimano
- Mount Type
- Shimano Direct Mount 2x
Compatibility
Shimano Chainring 28T for FC-M9100-2/FC-M9120-B2 is a Shimano chainring. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Cranksets this chainring fits6
RecommendedShimano
XTR CRANKSET 162 MM Q-FACTOR 48.8 MM CHAIN LINE 2X12s
- Both use the shimano direct mount 2x interface
RecommendedShimano
XTR CRANKSET 168 MM Q-FACTOR 51.8 MM CHAIN LINE 2X12s
- Both use the shimano direct mount 2x interface
RecommendedShimano
DEORE XT CRANKSET 48.8 MM CHAIN LINE 2X12s
- Both use the shimano direct mount 2x interface
RecommendedShimano
DEORE XT CRANKSET 51.8 MM CHAIN LINE 2X12s
- Both use the shimano direct mount 2x interface
RecommendedShimano
SLX MTB CRANKSET 172 MM Q-FACTOR 48.8 MM CHAIN LINE 2X12s
- Both use the shimano direct mount 2x interface
RecommendedShimano
SLX MTB CRANKSET 178 MM Q-FACTOR 51.8 MM CHAIN LINE 2X12s
- Both use the shimano direct mount 2x interface
Frequently Asked Questions
What fits Shimano Chainring 28T for FC-M9100-2/FC-M9120-B2?
On this page we list cranksets this chainring fits. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.