Shimano Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B
Chainring
Specifications
- Manufacturer
- Shimano
- Name
- Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B
- MPN
- Y0KJ38100
- Teeth (T)
- 38
- Speeds
- 12
- Drivetrain Brand
- Shimano
- BCD
- 104
- Mount Type
- 4-bolt 104bcd
Compatibility
Shimano Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B is a Shimano chainring. It is a 12-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Cranksets this chainring fits9
RecommendedShimano
CRANKSET 2-PIECE 3X10s
- Both are 104mm BCD
RecommendedShimano
CRANKSET CHAIN LINE 3 MM OUTBOARD 2X10s
- Both are 104mm BCD
RecommendedShimano
CRANKSET OCTALINK 3X10s
- Both are 104mm BCD
RecommendedHope
Evo Crankset
- Both are 104mm BCD
RecommendedXCADEY
XPOWER CRANKSET 104BCD
- Both are 104mm BCD
RecommendedShimano
DEORE TREKKING CRANKSET 3X10s
- Both are 104mm BCD
RecommendedShimano
DEORE XT TREKKING CRANKSET 3X10s
- Both are 104mm BCD
RecommendedShimano
SAINT CRANKSET 50.4 MM CHAIN LINE 1X10s
- Both use the 4-bolt 104bcd interface
RecommendedShimano
SAINT MTB CRANKSET 57.9 MM CHAIN LINE 1X10s
- Both use the 4-bolt 104bcd interface
Frequently Asked Questions
What fits Shimano Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B?
On this page we list cranksets this chainring fits. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B?
No. Shimano Chainring 38T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/SM-CRE80-12-B is a 12-speed component and needs a 12-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.