Shimano DEORE XT CRANKSET 2X11s

Crankset

DEORE XT CRANKSET 2X11s

Specifications

Manufacturer
Shimano
Name
DEORE XT CRANKSET 2X11s
Series
M8000
MPN
FC-M8000-B2
Groupset
Deore XT
Rear Speeds
11
Front Speeds (chainrings)
2
Drivetrain Brand
Shimano
Crank Length (mm)
170, 175, 180
Spindle Interface
24MM
BCD
96/64
Chainline (mm)
51.8
Compatible Chain Standards
Shimano LinkGlide, Shimano HG (Hyperglide)

Compatibility

Shimano DEORE XT CRANKSET 2X11s is a Shimano crankset. It is a 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Front derailleurs for this crankset20

ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 2X9s (FD-M3120-M-B)Shares a standard

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 2X9s (FD-M3120-M-B)

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALIVIO FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 2X9sShares a standard

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALIVIO FRONT DERAILLEUR SIDE SWING (E-TYPE MOUNT) 2X9sShares a standard

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (E-TYPE MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9sShares a standard

Shimano

ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9sShares a standard

Shimano

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10sShares a standard

Shimano

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X10/9sShares a standard

Shimano

CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10sShares a standard

Shimano

CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X10/9sShares a standard

Shimano

CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X11/10sShares a standard

Shimano

CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X11/10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9sShares a standard

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR DOWN SWING (DIRECT MOUNT) 2X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR DOWN SWING (DIRECT MOUNT) 2X10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING CLAMP BAND MOUNT 2X11sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING CLAMP BAND MOUNT 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING DIRECT MOUNT 2X11sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING DIRECT MOUNT 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 2X11sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE SIDE SWING FRONT DERAILLEUR CLAMP BAND MOUNT 2X10sShares a standard

Shimano

DEORE SIDE SWING FRONT DERAILLEUR CLAMP BAND MOUNT 2X10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE SIDE SWING FRONT DERAILLEUR DIRECT MOUNT 2X10sShares a standard

Shimano

DEORE SIDE SWING FRONT DERAILLEUR DIRECT MOUNT 2X10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE SIDE SWING FRONT DERAILLEUR E-TYPE MOUNT 2X10sShares a standard

Shimano

DEORE SIDE SWING FRONT DERAILLEUR E-TYPE MOUNT 2X10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE XT FRONT DERAILLEUR SIDE SWING (CLAMP BAND MOUNT ) 2X12sShares a standard

Shimano

DEORE XT FRONT DERAILLEUR SIDE SWING (CLAMP BAND MOUNT ) 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DEORE XT FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT ) 2X12sShares a standard

Shimano

DEORE XT FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT ) 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts

Chainrings that fit this crankset20

Chainring 34T for FC-M8000-2/FC-M8000-B2Recommended

Shimano

Chainring 34T for FC-M8000-2/FC-M8000-B2

  • Both are 96mm BCD
Chainring 36T for FC-M8000-2/FC-M8000-B2Recommended

Shimano

Chainring 36T for FC-M8000-2/FC-M8000-B2

  • Both are 96mm BCD
AFTERBURNER MTB ABSRecommended

FSA

AFTERBURNER MTB ABS

  • Both are 96mm BCD
AFTERBURNER MTB modularRecommended

FSA

AFTERBURNER MTB modular

  • Both are 96mm BCD
Chainring 22T for FC-U6000-2/FC-U6000-2BRecommended

Shimano

Chainring 22T for FC-U6000-2/FC-U6000-2B

  • Both are 96mm BCD
Chainring 30T for FC-M5100-1Recommended

Shimano

Chainring 30T for FC-M5100-1

  • Both are 96mm BCD
Chainring 30T for FC-MT511-1/FC-MT510-1Recommended

Shimano

Chainring 30T for FC-MT511-1/FC-MT510-1

  • Both are 96mm BCD
Chainring 30T for FC-U6000-1Recommended

Shimano

Chainring 30T for FC-U6000-1

  • Both are 96mm BCD
Chainring 32T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/CR-EM800Recommended

Shimano

Chainring 32T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/CR-EM800

  • Both are 96mm BCD
Chainring 32T for FC-M5100-1Recommended

Shimano

Chainring 32T for FC-M5100-1

  • Both are 96mm BCD
Chainring 32T for FC-MT511-1/FC-MT510-1Recommended

Shimano

Chainring 32T for FC-MT511-1/FC-MT510-1

  • Both are 96mm BCD
Chainring 32T for FC-U6000-1Recommended

Shimano

Chainring 32T for FC-U6000-1

  • Both are 96mm BCD
Chainring 32T for FC-U8000-2Recommended

Shimano

Chainring 32T for FC-U8000-2

  • Both are 96mm BCD
Chainring 34T for FC-M6000-2Recommended

Shimano

Chainring 34T for FC-M6000-2

  • Both are 96mm BCD
Chainring 34T for FC-MT610/FC-MT510-1Recommended

Shimano

Chainring 34T for FC-MT610/FC-MT510-1

  • Both are 96mm BCD
Chainring 36T for FC-M4100-2/FC-M4100-B2Recommended

Shimano

Chainring 36T for FC-M4100-2/FC-M4100-B2

  • Both are 96mm BCD
Chainring 36T for FC-M5100-2/FC-M5100-B2Recommended

Shimano

Chainring 36T for FC-M5100-2/FC-M5100-B2

  • Both are 96mm BCD
Chainring 36T for FC-M6000-2/FC-M6000-B2/FC-MT500-2/FC-MT500-B2Recommended

Shimano

Chainring 36T for FC-M6000-2/FC-M6000-B2/FC-MT500-2/FC-MT500-B2

  • Both are 96mm BCD
Chainring 36T for FC-U6000-2/FC-U6000-2BRecommended

Shimano

Chainring 36T for FC-U6000-2/FC-U6000-2B

  • Both are 96mm BCD
Chainring 38T for FC-M6000-2Recommended

Shimano

Chainring 38T for FC-M6000-2

  • Both are 96mm BCD

Bottom brackets for this crankset20

386EVO ABEC-3 BB for 24mm (Shimano) CranksRecommended

Wheels Manufacturing

386EVO ABEC-3 BB for 24mm (Shimano) Cranks

  • Both use a 24mm spindle
386EVO Angular Contact BB for 24mm (Shimano) CranksRecommended

Wheels Manufacturing

386EVO Angular Contact BB for 24mm (Shimano) Cranks

  • Both use a 24mm spindle
878Recommended

Token

878

  • Both use a 24mm spindle
BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)Recommended

Wheels Manufacturing

BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)Recommended

Wheels Manufacturing

BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)Recommended

Wheels Manufacturing

BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)Recommended

Wheels Manufacturing

BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)

  • Both use a 24mm spindle
BB30ARRecommended

Token

BB30AR

  • Both use a 24mm spindle
BB3724Recommended

Token

BB3724

  • Both use a 24mm spindle
BB38624PSRecommended

Token

BB38624PS

  • Both use a 24mm spindle
BB386PSRecommended

Token

BB386PS

  • Both use a 24mm spindle
BB4124PSRecommended

Token

BB4124PS

  • Both use a 24mm spindle
BB46BR24Recommended

Token

BB46BR24

  • Both use a 24mm spindle
BB47R24Recommended

Token

BB47R24

  • Both use a 24mm spindle
BB47V24Recommended

Token

BB47V24

  • Both use a 24mm spindle
BB841PSRecommended

Token

BB841PS

  • Both use a 24mm spindle
BB841T-41Recommended

Token

BB841T-41

  • Both use a 24mm spindle
BB841T-42Recommended

Token

BB841T-42

  • Both use a 24mm spindle
BB841T-46Recommended

Token

BB841T-46

  • Both use a 24mm spindle
BB86 Bottom Bracket (Shimano 24mm)Recommended

Cybrei

BB86 Bottom Bracket (Shimano 24mm)

  • Both use a 24mm spindle

Frequently Asked Questions

What fits Shimano DEORE XT CRANKSET 2X11s?

On this page we list front derailleurs for this crankset, chainrings that fit this crankset, bottom brackets for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano DEORE XT CRANKSET 2X11s?

No. Shimano DEORE XT CRANKSET 2X11s is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.