Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s
Crankset

Specifications
- Manufacturer
- Shimano
- Name
- HYPERDRIVE TRAIL MTB CRANKSET 3X9s
- MPN
- FC-MT101
- Rear Speeds
- 9
- Front Speeds (chainrings)
- 3
- Drivetrain Brand
- Shimano
- Chainring Sizes
- 40, 30, 22
- Crank Length (mm)
- 170, 175
- Spindle Interface
- SQUARE_TAPER_JIS
- Chainring Mount
- Riveted Non Replaceable
- Chainline (mm)
- 50
- Compatible Chain Standards
- Shimano HG (Hyperglide)
Compatibility
Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s is a Shimano crankset. It is a 9-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Bottom brackets for this crankset10
RecommendedShimano
CARTRIDGE BOTTOM BRACKET
- Both use a square taper jis spindle
RecommendedToken
JIS Square Taper (BSA / JIS)
- Both use a square taper jis spindle
RecommendedToken
JIS Square Taper (ITA / JIS)
- Both use a square taper jis spindle
RecommendedShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)
- Both use a square taper jis spindle
RecommendedShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN101)
- Both use a square taper jis spindle
RecommendedShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)
- Both use a square taper jis spindle
RecommendedShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)
- Both use a square taper jis spindle
RecommendedShimano
SQUARE TYPE BOTTOM BRACKET (BB-UN300)
- Both use a square taper jis spindle
RecommendedShimano
TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKET
- Both use a square taper jis spindle
RecommendedShimano
TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASE
- Both use a square taper jis spindle
Front derailleurs for this crankset20
RecommendedShimano
ACERA FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 3X9s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) FOR TREKKING 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (HIGH CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (LOW CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (MIDDLE CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Chains for this crankset3
Frequently Asked Questions
What fits Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s?
On this page we list bottom brackets for this crankset, front derailleurs for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s?
No. Shimano HYPERDRIVE TRAIL MTB CRANKSET 3X9s is a 9-speed component and needs a 9-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.


