Ibis Mojo 3 V3

Frame

Mojo 3 V3

Specifications

Manufacturer
Ibis
Name
Mojo 3 V3
Discipline
Mountain
Material
Carbon
Head Tube
Tapered
Upper S.H.I.S
ZS44/28.6
Lower S.H.I.S
ZS56/40
Max Tyre Width (mm)
71
Max Fork Travel (mm)
140
Seatpost Diameter (mm)
31.6
Wheel Sizes
650b / 27.5"
Frame Size
S, M, L, XL
Front Axle Standard
15 × 110 mm (Boost)
Rear Axle Standard
12 × 148 mm (Boost)
Rear Derailleur Mount
Standard Hanger
BB Standard
BSA THREADED
BB Thread Type
BSA (English)
Disc Brake Mount
Post Mount
Cable Routing
Internal
Max Chainring Size (T)
34

Compatibility

Ibis Mojo 3 V3 is a Ibis mtb frame. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Bottom brackets for this frame shell20

878Recommended

Token

878

  • Both are bsa threaded bottom bracket shells
BB29BSARecommended

Token

BB29BSA

  • Both are bsa threaded bottom bracket shells
BB386 crank to BSA frame thread Ceramic bearingsRecommended

FSA

BB386 crank to BSA frame thread Ceramic bearings

  • Both are bsa threaded bottom bracket shells
BB392 crank to BSA frameRecommended

FSA

BB392 crank to BSA frame

  • Both are bsa threaded bottom bracket shells
BB392BSARecommended

Token

BB392BSA

  • Both are bsa threaded bottom bracket shells
BSA Bottom Bracket (Shimano 24mm)Recommended

Cybrei

BSA Bottom Bracket (Shimano 24mm)

  • Both are bsa threaded bottom bracket shells
BSA Bottom Bracket (SRAM DUB)Recommended

Cybrei

BSA Bottom Bracket (SRAM DUB)

  • Both are bsa threaded bottom bracket shells
CARTRIDGE BOTTOM BRACKETRecommended

Shimano

CARTRIDGE BOTTOM BRACKET

  • Both are bsa threaded bottom bracket shells
DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT800)Recommended

Shimano

DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT800)

  • Both are bsa threaded bottom bracket shells
DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT801)Recommended

Shimano

DEORE XT THREADED BOTTOM BRACKET 68/73 MM SHELL WIDTH (BB-MT801)

  • Both are bsa threaded bottom bracket shells
DUB-BSARecommended

Praxis

DUB-BSA

  • Both are bsa threaded bottom bracket shells
ISO Square Taper (BSA / ISO)Recommended

Token

ISO Square Taper (BSA / ISO)

  • Both are bsa threaded bottom bracket shells
JIS Square Taper (BSA / JIS)Recommended

Token

JIS Square Taper (BSA / JIS)

  • Both are bsa threaded bottom bracket shells
M24 – BSA THREADEDRecommended

Praxis

M24 – BSA THREADED

  • Both are bsa threaded bottom bracket shells
Mega Exo Comet crank to 68/73mm frameRecommended

FSA

Mega Exo Comet crank to 68/73mm frame

  • Both are bsa threaded bottom bracket shells
MegaExo Comet crank to BSA 100mmRecommended

FSA

MegaExo Comet crank to BSA 100mm

  • Both are bsa threaded bottom bracket shells
MegaExo crankRecommended

FSA

MegaExo crank

  • Both are bsa threaded bottom bracket shells
MegaExo Gamma Drive crank to BSA frameRecommended

FSA

MegaExo Gamma Drive crank to BSA frame

  • Both are bsa threaded bottom bracket shells
MegaExo GOSSAMER crank to BSA frame Di2 compatibleRecommended

FSA

MegaExo GOSSAMER crank to BSA frame Di2 compatible

  • Both are bsa threaded bottom bracket shells
MegaExo K-Force crank to BSA 68/73mm frameRecommended

FSA

MegaExo K-Force crank to BSA 68/73mm frame

  • Both are bsa threaded bottom bracket shells

Brake calipers this frame mounts20

2-PISTON BRAKE CALIPER (BR-MT200)Recommended

Shimano

2-PISTON BRAKE CALIPER (BR-MT200)

  • Both use a post mount disc brake
2-PISTON BRAKE CALIPER (BR-MT500)Recommended

Shimano

2-PISTON BRAKE CALIPER (BR-MT500)

  • Both use a post mount disc brake
4-PISTON BRAKE CALIPERRecommended

Shimano

4-PISTON BRAKE CALIPER

  • Both use a post mount disc brake
4-PISTON BRAKE CALIPER (BR-MT420)Recommended

Shimano

4-PISTON BRAKE CALIPER (BR-MT420)

  • Both use a post mount disc brake
4-PISTON BRAKE CALIPER (BR-MT520)Recommended

Shimano

4-PISTON BRAKE CALIPER (BR-MT520)

  • Both use a post mount disc brake
AFTERBURNER MTBRecommended

FSA

AFTERBURNER MTB

  • Both use a post mount disc brake
Brake Caliper (BR-M00B-160F)Recommended

LTWOO

Brake Caliper (BR-M00B-160F)

  • Both use a post mount disc brake
Brake Caliper (BR-M00B-160R)Recommended

LTWOO

Brake Caliper (BR-M00B-160R)

  • Both use a post mount disc brake
Brake Caliper (BR-M01B-160F)Recommended

LTWOO

Brake Caliper (BR-M01B-160F)

  • Both use a post mount disc brake
Brake Caliper (BR-M01B-160R)Recommended

LTWOO

Brake Caliper (BR-M01B-160R)

  • Both use a post mount disc brake
DEORE 2-PISTON BRAKE CALIPER (BR-MT410)Recommended

Shimano

DEORE 2-PISTON BRAKE CALIPER (BR-MT410)

  • Both use a post mount disc brake
EVO GR4Recommended

Hope

EVO GR4

  • Both use a post mount disc brake
EVO TR4Recommended

Hope

EVO TR4

  • Both use a post mount disc brake
Evo X2Recommended

Hope

Evo X2

  • Both use a post mount disc brake
MA3000 Hydraulic Brake Caliper Set (MTB)Recommended

WheelTop

MA3000 Hydraulic Brake Caliper Set (MTB)

  • Both use a post mount disc brake
RX4+SL PMRecommended

Hope

RX4+SL PM

  • Both use a post mount disc brake
Tech 3 DuoRecommended

Hope

Tech 3 Duo

  • Both use a post mount disc brake
Tech 4 V4Recommended

Hope

Tech 4 V4

  • Both use a post mount disc brake
XCR Pro E4Recommended

Hope

XCR Pro E4

  • Both use a post mount disc brake
XCR Pro X2Recommended

Hope

XCR Pro X2

  • Both use a post mount disc brake

Forks with a matching steerer and wheel size20

Firestarter Carbon ForkRecommended

Salsa

Firestarter Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
🚲Recommended

Lauf

Grit

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
🚲Recommended

Lauf

Grit SL

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
RC32Recommended

X-Fusion

RC32

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
RC32 BoostRecommended

X-Fusion

RC32 Boost

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
🚲Recommended

Lauf

TR Boost 29

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
VELVET RLRecommended

X-Fusion

VELVET RL

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
Waxwing Carbon ForkRecommended

Salsa

Waxwing Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
Carbon Gravel Fork No.9 MCX+Recommended

Whisky Parts Co

Carbon Gravel Fork No.9 MCX+

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
JudyRecommended

RockShox

Judy

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
Judy Gold RLRecommended

RockShox

Judy Gold RL

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
Judy Silver TKRecommended

RockShox

Judy Silver TK

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
MCX Monstercross Fork Monster crossRecommended

Whisky Parts Co

MCX Monstercross Fork Monster cross

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.7 CX Disc Cyclocross ForkRecommended

Whisky Parts Co

No.7 CX Disc Cyclocross Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.9 15mm 150 Fat ForkRecommended

Whisky Parts Co

No.9 15mm 150 Fat Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.9 15mm Mountain ForkRecommended

Whisky Parts Co

No.9 15mm Mountain Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.9 CXLR ForkRecommended

Whisky Parts Co

No.9 CXLR Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.9 Cyclocross Fork Disc 12mm TaperedRecommended

Whisky Parts Co

No.9 Cyclocross Fork Disc 12mm Tapered

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.9 MTN Boost ST ForkRecommended

Whisky Parts Co

No.9 MTN Boost ST Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels
No.9 RD+ ForkRecommended

Whisky Parts Co

No.9 RD+ Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 650b wheels

Frequently Asked Questions

What fits Ibis Mojo 3 V3?

On this page we list bottom brackets for this frame shell, brake calipers this frame mounts, forks with a matching steerer and wheel size. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I mix Ibis Mojo 3 V3 with road components?

Ibis Mojo 3 V3 is recorded as a mtb component. Some standards do carry across (cassette spacing at a given speed count, for instance), but cable pull ratio and chainline frequently differ between mtb and road groups, so check the specific pairing rather than assuming it carries over.