Shimano MTB CRANKSET 3X10s
Crankset

Specifications
- Manufacturer
- Shimano
- Name
- MTB CRANKSET 3X10s
- MPN
- FC-MT500-3
- Rear Speeds
- 10
- Front Speeds (chainrings)
- 3
- Drivetrain Brand
- Shimano
- Chainring Sizes
- 40, 30, 22
- Crank Length (mm)
- 170, 175
- Spindle Interface
- 24MM
- BCD
- 96/64
- Chainline (mm)
- 50
- Compatible Chain Standards
- Shimano HG (Hyperglide)
Compatibility
Shimano MTB CRANKSET 3X10s is a Shimano crankset. It is a 10-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Front derailleurs for this crankset20
RecommendedShimano
ACERA FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 3X9s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) FOR TREKKING 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (HIGH CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (LOW CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING (MIDDLE CLAMP BAND MOUNT) 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 3X10s
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)
- Both are set up for 3x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L6)
- Both are set up for 3x
- Both are Shimano drivetrain parts
Chainrings that fit this crankset20
RecommendedFSA
AFTERBURNER MTB ABS
- Both are 96mm BCD
RecommendedFSA
AFTERBURNER MTB modular
- Both are 96mm BCD
RecommendedShimano
Chainring 30T for FC-MT511-1/FC-MT510-1
- Both are 96mm BCD
RecommendedShimano
Chainring 32T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/CR-EM800
- Both are 96mm BCD
RecommendedShimano
Chainring 32T for FC-MT511-1/FC-MT510-1
- Both are 96mm BCD
RecommendedShimano
Chainring 34T for FC-MT610/FC-MT510-1
- Both are 96mm BCD
RecommendedFSA
COMET triple
- Both are 96mm BCD
RecommendedShimano
E-BIKE CHAINRING 12s
- Both are 96mm BCD
RecommendedFSA
POWERBOX MTB 1X
- Both are 96mm BCD
RecommendedFSA
SL-K MTB modular
- Both are 96mm BCD
RecommendedShimano
Chainring 22T for FC-U6000-2/FC-U6000-2B
- Both are 96mm BCD
RecommendedShimano
Chainring 30T for FC-M5100-1
- Both are 96mm BCD
RecommendedShimano
Chainring 30T for FC-U6000-1
- Both are 96mm BCD
RecommendedShimano
Chainring 32T for FC-M5100-1
- Both are 96mm BCD
RecommendedShimano
Chainring 32T for FC-U6000-1
- Both are 96mm BCD
RecommendedShimano
Chainring 32T for FC-U8000-2
- Both are 96mm BCD
RecommendedShimano
Chainring 34T for FC-M6000-2
- Both are 96mm BCD
RecommendedShimano
Chainring 34T for FC-M8000-2/FC-M8000-B2
- Both are 96mm BCD
RecommendedShimano
Chainring 36T for FC-M4100-2/FC-M4100-B2
- Both are 96mm BCD
RecommendedShimano
Chainring 36T for FC-M5100-2/FC-M5100-B2
- Both are 96mm BCD
Bottom brackets for this crankset20
RecommendedWheels Manufacturing
386EVO ABEC-3 BB for 24mm (Shimano) Cranks
- Both use a 24mm spindle
RecommendedWheels Manufacturing
386EVO Angular Contact BB for 24mm (Shimano) Cranks
- Both use a 24mm spindle
RecommendedToken
878
- Both use a 24mm spindle
RecommendedWheels Manufacturing
BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)
- Both use a 24mm spindle
RecommendedWheels Manufacturing
BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)
- Both use a 24mm spindle
RecommendedWheels Manufacturing
BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)
- Both use a 24mm spindle
RecommendedWheels Manufacturing
BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)
- Both use a 24mm spindle
RecommendedToken
BB30AR
- Both use a 24mm spindle
RecommendedToken
BB3724
- Both use a 24mm spindle
RecommendedToken
BB38624PS
- Both use a 24mm spindle
RecommendedToken
BB386PS
- Both use a 24mm spindle
RecommendedToken
BB4124PS
- Both use a 24mm spindle
RecommendedToken
BB46BR24
- Both use a 24mm spindle
RecommendedToken
BB47R24
- Both use a 24mm spindle
RecommendedToken
BB47V24
- Both use a 24mm spindle
RecommendedToken
BB841PS
- Both use a 24mm spindle
RecommendedToken
BB841T-41
- Both use a 24mm spindle
RecommendedToken
BB841T-42
- Both use a 24mm spindle
RecommendedToken
BB841T-46
- Both use a 24mm spindle
RecommendedCybrei
BB86 Bottom Bracket (Shimano 24mm)
- Both use a 24mm spindle
Chains for this crankset4
Frequently Asked Questions
What fits Shimano MTB CRANKSET 3X10s?
On this page we list front derailleurs for this crankset, chainrings that fit this crankset, bottom brackets for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano MTB CRANKSET 3X10s?
No. Shimano MTB CRANKSET 3X10s is a 10-speed component and needs a 10-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.



