LTWOO R3 Front Derailleur (FD-R0801-DT)
Front Derailleur
Compatibility
LTWOO R3 Front Derailleur (FD-R0801-DT) is a LTWOO front derailleur. It is an 8-speed component. It uses Cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
R3 Groupset7
A groupset is designed and tested as one system, so these are the most reliable match. Other compatible parts are listed below.
RecommendedLTWOO
R3 Shifter (ST-R0806-2L)
- Ships in the R3 Groupset
RecommendedLTWOO
R3 Shifter (ST-R0806-R)
- Ships in the R3 Groupset
RecommendedLTWOO
R3 Rear Derailleur (RD-R0800-M)
- Ships in the R3 Groupset
RecommendedLTWOO
Brake Caliper (BR-R03B-140R)
- Ships in the R3 Groupset
RecommendedLTWOO
Brake Caliper (BR-R06B-140F)
- Ships in the R3 Groupset
RecommendedLTWOO
Brake Rotor (RT-R00-140)
- Ships in the R3 Groupset
RecommendedLTWOO
Brake Rotor (RT-R00-160)
- Ships in the R3 Groupset
Shifters that drive this derailleur20
RecommendedLTWOO
R3 Shifter (ST-R0806-2L)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
ADVENT Xpress Shifter 2x9 Left (SL-M819-L)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifter - Left Road for Double/Triple
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - 2/3x8
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - 2/3x9
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x10
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - MTB 2/3x11
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2/3x10
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2/3x11
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Road 2x12
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Bar End Shifters - Tiagra 4700 2/3x10
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Drop Bar Shifters 2x10 for Tiagra 4700 (SB-R502B)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Drop Bar Shifters 2x11 (SB-R512B-BK)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Xpress Plus Shifters 2x10 for Tiagra 4700 (SL-R860B-2)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Xpress Plus Shifters 2x11 (SL-R861-2)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Centos Xpress Shifters 2x11 Indicator (SL-R761-2)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 (SL-D10)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x10 for Tiagra 4700 (SL-D10B)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x8 (SL-D08)
- Both are set up for 2x
- Both use cable actuation
microSHIFT
Downtube Shifters 2/3x9 (SL-D09)
- Both are set up for 2x
- Both use cable actuation
Frequently Asked Questions
What fits LTWOO R3 Front Derailleur (FD-R0801-DT)?
On this page we list shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with LTWOO R3 Front Derailleur (FD-R0801-DT)?
No. LTWOO R3 Front Derailleur (FD-R0801-DT) is an 8-speed component and needs an 8-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does LTWOO R3 Front Derailleur (FD-R0801-DT) work with electronic shifting like Di2 or AXS?
No. LTWOO R3 Front Derailleur (FD-R0801-DT) is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.