Ibis Ripley 1st Gen V1

Frame

Ripley 1st Gen V1

Specifications

Manufacturer
Ibis
Name
Ripley 1st Gen V1
Discipline
Mountain
Material
Carbon
Head Tube
Tapered
Upper S.H.I.S
ZS44/28.6
Lower S.H.I.S
EC49/40
Max Fork Travel (mm)
120
Seatpost Diameter (mm)
31.6
Wheel Sizes
700c / 29"
Frame Size
S, M, L, XL
Rear Axle Standard
12 × 142 mm
Rear Derailleur Mount
Standard Hanger
BB Standard
BB92 PRESSFIT
Disc Brake Mount
Post Mount
Cable Routing
Internal

Compatibility

Ibis Ripley 1st Gen V1 is a Ibis mtb frame. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Brake calipers this frame mounts20

2-PISTON BRAKE CALIPER (BR-MT200)Recommended

Shimano

2-PISTON BRAKE CALIPER (BR-MT200)

  • Both use a post mount disc brake
2-PISTON BRAKE CALIPER (BR-MT500)Recommended

Shimano

2-PISTON BRAKE CALIPER (BR-MT500)

  • Both use a post mount disc brake
4-PISTON BRAKE CALIPERRecommended

Shimano

4-PISTON BRAKE CALIPER

  • Both use a post mount disc brake
4-PISTON BRAKE CALIPER (BR-MT420)Recommended

Shimano

4-PISTON BRAKE CALIPER (BR-MT420)

  • Both use a post mount disc brake
4-PISTON BRAKE CALIPER (BR-MT520)Recommended

Shimano

4-PISTON BRAKE CALIPER (BR-MT520)

  • Both use a post mount disc brake
AFTERBURNER MTBRecommended

FSA

AFTERBURNER MTB

  • Both use a post mount disc brake
Brake Caliper (BR-M00B-160F)Recommended

LTWOO

Brake Caliper (BR-M00B-160F)

  • Both use a post mount disc brake
Brake Caliper (BR-M00B-160R)Recommended

LTWOO

Brake Caliper (BR-M00B-160R)

  • Both use a post mount disc brake
Brake Caliper (BR-M01B-160F)Recommended

LTWOO

Brake Caliper (BR-M01B-160F)

  • Both use a post mount disc brake
Brake Caliper (BR-M01B-160R)Recommended

LTWOO

Brake Caliper (BR-M01B-160R)

  • Both use a post mount disc brake
DEORE 2-PISTON BRAKE CALIPER (BR-MT410)Recommended

Shimano

DEORE 2-PISTON BRAKE CALIPER (BR-MT410)

  • Both use a post mount disc brake
EVO GR4Recommended

Hope

EVO GR4

  • Both use a post mount disc brake
EVO TR4Recommended

Hope

EVO TR4

  • Both use a post mount disc brake
Evo X2Recommended

Hope

Evo X2

  • Both use a post mount disc brake
MA3000 Hydraulic Brake Caliper Set (MTB)Recommended

WheelTop

MA3000 Hydraulic Brake Caliper Set (MTB)

  • Both use a post mount disc brake
RX4+SL PMRecommended

Hope

RX4+SL PM

  • Both use a post mount disc brake
Tech 3 DuoRecommended

Hope

Tech 3 Duo

  • Both use a post mount disc brake
Tech 4 V4Recommended

Hope

Tech 4 V4

  • Both use a post mount disc brake
XCR Pro E4Recommended

Hope

XCR Pro E4

  • Both use a post mount disc brake
XCR Pro X2Recommended

Hope

XCR Pro X2

  • Both use a post mount disc brake

Bottom brackets for this frame shell8

BB392 crank to press fit BB89.5/92mm frameRecommended

FSA

BB392 crank to press fit BB89.5/92mm frame

  • Both are bb92 pressfit bottom bracket shells
DEORE XT PRESS-FIT BOTTOM BRACKET 89.5/92 MM SHELL WIDTHRecommended

Shimano

DEORE XT PRESS-FIT BOTTOM BRACKET 89.5/92 MM SHELL WIDTH

  • Both are bb92 pressfit bottom bracket shells
MegaExo MTB crank to press fit BB92 frame (24mm)Recommended

FSA

MegaExo MTB crank to press fit BB92 frame (24mm)

  • Both are bb92 pressfit bottom bracket shells
MegaExo MTB crank to press fit BB92 frame with ceramic bearingsRecommended

FSA

MegaExo MTB crank to press fit BB92 frame with ceramic bearings

  • Both are bb92 pressfit bottom bracket shells
PRESS-FIT BOTTOM BRACKET 89.5/92 MMRecommended

Shimano

PRESS-FIT BOTTOM BRACKET 89.5/92 MM

  • Both are bb92 pressfit bottom bracket shells
SAINT PRESS-FIT BOTTOM BRACKET 104.5/107 MM SHELL WIDTHRecommended

Shimano

SAINT PRESS-FIT BOTTOM BRACKET 104.5/107 MM SHELL WIDTH

  • Both are bb92 pressfit bottom bracket shells
SAINT PRESS-FIT BOTTOM BRACKET 89.5/92 MM SHELL WIDTHRecommended

Shimano

SAINT PRESS-FIT BOTTOM BRACKET 89.5/92 MM SHELL WIDTH

  • Both are bb92 pressfit bottom bracket shells
XTR PRESS-FIT BOTTOM BRACKET 89.5/92 MM SHELL WIDTHRecommended

Shimano

XTR PRESS-FIT BOTTOM BRACKET 89.5/92 MM SHELL WIDTH

  • Both are bb92 pressfit bottom bracket shells

Forks with a matching steerer and wheel size20

Allroad ForkRecommended

Deda Elementi

Allroad Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Cutthroat Carbon ForkRecommended

Salsa

Cutthroat Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Firestarter Carbon ForkRecommended

Salsa

Firestarter Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
🚲Recommended

Lauf

Grit

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
🚲Recommended

Lauf

Grit SL

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Road In-Route Fork 43mmRecommended

ENVE

Road In-Route Fork 43mm

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Road In-Route Fork 50mmRecommended

ENVE

Road In-Route Fork 50mm

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
🚲Recommended

Lauf

TR Boost 29

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Waxwing Carbon ForkRecommended

Salsa

Waxwing Carbon Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
32 FACTORY TC - GRIP SLRecommended

Fox

32 FACTORY TC - GRIP SL

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
32 PERFORMANCE TAPER-CAST - GRIPRecommended

Fox

32 PERFORMANCE TAPER-CAST - GRIP

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Carbon Gravel Fork No.9 MCX+Recommended

Whisky Parts Co

Carbon Gravel Fork No.9 MCX+

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
CXD ForkRecommended

Kinesis

CXD Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
DC37 Disc ForkRecommended

Kinesis

DC37 Disc Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Fork Aithein CarbonRecommended

Kinesis

Fork Aithein Carbon

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
Fork Aithein Columbus BlackRecommended

Kinesis

Fork Aithein Columbus Black

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
🚲Recommended

Wound Up

Gravel X Disc 1.5" Tapered

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
GTD Disc ForkRecommended

Kinesis

GTD Disc Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
GTD ForkRecommended

Kinesis

GTD Fork

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels
JudyRecommended

RockShox

Judy

  • Both use a tapered 1-1/8" to 1.5" steerer
  • Both are built for 700c wheels

Frequently Asked Questions

What fits Ibis Ripley 1st Gen V1?

On this page we list brake calipers this frame mounts, bottom brackets for this frame shell, forks with a matching steerer and wheel size. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I mix Ibis Ripley 1st Gen V1 with road components?

Ibis Ripley 1st Gen V1 is recorded as a mtb component. Some standards do carry across (cassette spacing at a given speed count, for instance), but cable pull ratio and chainline frequently differ between mtb and road groups, so check the specific pairing rather than assuming it carries over.