SRAM Rival eTap AXS Wide Front Derailleur
Front Derailleur
Specifications
- Manufacturer
- SRAM
- Name
- Rival eTap AXS Wide Front Derailleur
- MPN
- FD-RIV-EW-D1
- Groupset
- Rival
- Rear Speeds
- 12
- Front Speeds
- 2
- Drivetrain Brand
- Sram
- Shifting Type
- Electronic (AXS)
- Mount Type
- Braze-On
- Chainline (mm)
- 47.5
Compatibility
SRAM Rival eTap AXS Wide Front Derailleur is a SRAM front derailleur. It is a 12-speed component. It uses axs shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Cranksets for this front derailleur3
Shares a standardSRAM
Force 43/30T Wide Crankset
- Both are set up for 2x
- Both are SRAM drivetrain parts
Shares a standardSRAM
Force AXS Wide Power Meter Crankset
- Both are set up for 2x
- Both are SRAM drivetrain parts
Shares a standardSRAM
Rival 43/30 Wide Crankset
- Both are set up for 2x
- Both are SRAM drivetrain parts
Shifters that drive this derailleur4
Shares a standardSRAM
Apex AXS Shift-Brake Lever
- Both use axs actuation
- Both are SRAM drivetrain parts
Shares a standardSRAM
Force AXS Shift-Brake Lever
- Both use axs actuation
- Both are SRAM drivetrain parts
Shares a standardSRAM
RED AXS Shift-Brake Lever
- Both use axs actuation
- Both are SRAM drivetrain parts
Shares a standardSRAM
Rival AXS Shift-Brake Lever
- Both use axs actuation
- Both are SRAM drivetrain parts
Frequently Asked Questions
What fits SRAM Rival eTap AXS Wide Front Derailleur?
On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with SRAM Rival eTap AXS Wide Front Derailleur?
No. SRAM Rival eTap AXS Wide Front Derailleur is a 12-speed component and needs a 12-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.