3T Strada WPNT
Frame
Specifications
- Manufacturer
- 3T
- Name
- Strada WPNT
- Discipline
- Road
- Material
- Carbon
- Head Tube
- Tapered
- Upper S.H.I.S
- IS42
- Lower S.H.I.S
- IS47
- Wheel Sizes
- 700c / 29"
- Frame Size
- XS, S, M, L, XL
- Front Axle Standard
- 12 × 100 mm
- Rear Axle Standard
- 12 × 142 mm
- Rear Derailleur Mount
- Standard Hanger
Included Components
fork3T Strada WPNT Fork
headset3T Strada WPNT Headset
seatpost3T Strada WPNT Seatpost
handlebar3T Strada WPNT Handlebar
stem3T Strada WPNT Stem
| Image | Component | Part | Quantity |
|---|---|---|---|
| fork | 3T Strada WPNT Fork | 1 |
| headset | 3T Strada WPNT Headset | 1 |
| seatpost | 3T Strada WPNT Seatpost | 1 |
| handlebar | 3T Strada WPNT Handlebar | 1 |
| stem | 3T Strada WPNT Stem | 1 |
Compatibility
3T Strada WPNT is a 3T road frame. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Forks with a matching steerer and wheel size20
RecommendedDeda Elementi
Allroad Fork
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedFormula
Belva
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedMarzocchi
Bomber Z
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedMarzocchi
Bomber Z1
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedMarzocchi
Bomber Z1 Coil
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedMarzocchi
Bomber Z1 E-Optimized
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedMarzocchi
Bomber Z2
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedMarzocchi
Bomber Z2 E-Optimized
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedSalsa
Cutthroat Carbon Fork
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedSalsa
Firestarter Carbon Fork
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
Lauf
Grit
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
Lauf
Grit SL
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedFormula
JOSH BRYCELAND SELVA
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedX-Fusion
RC32 29
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedENVE
Road In-Route Fork 43mm
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedENVE
Road In-Route Fork 50mm
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedFormula
SELVA C
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedFormula
SELVA R
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedFormula
SELVA S
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
RecommendedFormula
SELVA V
- Both use a tapered 1-1/8" to 1.5" steerer
- Both are built for 700c wheels
Frequently Asked Questions
What fits 3T Strada WPNT?
On this page we list forks with a matching steerer and wheel size. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I mix 3T Strada WPNT with MTB components?
3T Strada WPNT is recorded as a road component. Some standards do carry across (cassette spacing at a given speed count, for instance), but cable pull ratio and chainline frequently differ between road and MTB groups, so check the specific pairing rather than assuming it carries over.