Shimano TOURNEY TY MTB CRANKSET 3X8s

Crankset

TOURNEY TY MTB CRANKSET 3X8s

Specifications

Manufacturer
Shimano
Name
TOURNEY TY MTB CRANKSET 3X8s
Series
TX800
MPN
FC-TX801
Groupset
Tourney
Rear Speeds
8
Front Speeds (chainrings)
3[1]
Drivetrain Brand
Shimano
Crank Length (mm)
165, 170, 175
Spindle Interface
Square Taper JIS
Chainring Mount
Riveted Non Replaceable
Chainline (mm)
50[2]
Compatible Chain Standards
Shimano HG (Hyperglide)[2]
Sources
  1. [1] AI-extracted, not yet checked against a named source (added 9 Feb 2026): Front Speeds (chainrings)
  2. [2] productinfo.shimano.com, checked 7 Aug 2026: Chainline (mm), Compatible Chain Standards

Compatibility

Shimano TOURNEY TY MTB CRANKSET 3X8s is a Shimano crankset. It is an 8-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Bottom brackets for this crankset10

TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKETRecommended

Shimano

TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKET

  • Both use a square taper jis spindle
TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASERecommended

Shimano

TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASE

  • Both use a square taper jis spindle
CARTRIDGE BOTTOM BRACKETMechanically compatible

Shimano

CARTRIDGE BOTTOM BRACKET

  • Both use a square taper jis spindle
JIS Square Taper (BSA / JIS)Mechanically compatible

Token

JIS Square Taper (BSA / JIS)

  • Both use a square taper jis spindle
JIS Square Taper (ITA / JIS)Mechanically compatible

Token

JIS Square Taper (ITA / JIS)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN101)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN101)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300)

  • Both use a square taper jis spindle

Front derailleurs for this crankset20

TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)Shares a standard

Shimano

TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS3)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)Shares a standard

Shimano

TOURNEY TX FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7s (FD-TX800-TS6)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
ACERA FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9sShares a standard

Shimano

ACERA FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 3X9sShares a standard

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 3X9s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3)Shares a standard

Shimano

ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS3)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS6)Shares a standard

Shimano

ALTUS FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-DS6)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS3)Shares a standard

Shimano

ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS3)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS6)Shares a standard

Shimano

ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X9s (FD-M2000-TS6)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) FOR TREKKING 3X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR DOWN SWING (CLAMP BAND MOUNT) FOR TREKKING 3X10s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 3X10s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING (HIGH CLAMP BAND MOUNT) 3X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING (HIGH CLAMP BAND MOUNT) 3X10s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING (LOW CLAMP BAND MOUNT) 3X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING (LOW CLAMP BAND MOUNT) 3X10s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING (MIDDLE CLAMP BAND MOUNT) 3X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING (MIDDLE CLAMP BAND MOUNT) 3X10s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 3X10sShares a standard

Shimano

DEORE FRONT DERAILLEUR SIDE SWING E-TYPE MOUNT 3X10s

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L3)Shares a standard

Shimano

DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L3)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L6)Shares a standard

Shimano

DEORE TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T6000-L6)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-3)Shares a standard

Shimano

DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-3)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-6)Shares a standard

Shimano

DEORE XT TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) FOR TREKKING 3X10s (FD-T8000-L-6)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)Shares a standard

Shimano

TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L3)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L6)Shares a standard

Shimano

TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 3X8/7/6s (FD-TY600-L6)

  • Both are set up for 3x
  • Both are Shimano drivetrain parts

Frequently Asked Questions

What fits Shimano TOURNEY TY MTB CRANKSET 3X8s?

On this page we list bottom brackets for this crankset, front derailleurs for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano TOURNEY TY MTB CRANKSET 3X8s?

No. Shimano TOURNEY TY MTB CRANKSET 3X8s is an 8-speed component and needs an 8-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.