Shimano ULTEGRA 50T Chainring for FC-08

Chainring

ULTEGRA 50T Chainring for FC-08

Specifications

Manufacturer
Shimano
Name
ULTEGRA 50T Chainring for FC-08
MPN
Y0V398060
Groupset
Ultegra
Teeth (T)
50
Speeds
11
Drivetrain Brand
Shimano
BCD
110
Mount Type
4-bolt Asymmetric 110bcd

Compatibility

Shimano ULTEGRA 50T Chainring for FC-08 is a Shimano chainring. It is a 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Cranksets this chainring fits20

CRANKSET 2X11sRecommended

Shimano

CRANKSET 2X11s

  • Both use the 4-bolt asymmetric 110bcd interface
CRANKSET 2X12sRecommended

Shimano

CRANKSET 2X12s

  • Both use the 4-bolt asymmetric 110bcd interface
K-Force Light BB386EVORecommended

FSA

K-Force Light BB386EVO

  • Both are 110mm BCD
SL-K LIGHT ABS BB386EVO CRANKSET 1xRecommended

FSA

SL-K LIGHT ABS BB386EVO CRANKSET 1x

  • Both are 110mm BCD
XPOWER CRANKSET 110BCDRecommended

XCADEY

XPOWER CRANKSET 110BCD

  • Both are 110mm BCD
XPOWER CRANKSET 110BCD-4SRecommended

XCADEY

XPOWER CRANKSET 110BCD-4S

  • Both are 110mm BCD
105 CRANKSET 2X11sRecommended

Shimano

105 CRANKSET 2X11s

  • Both use the 4-bolt asymmetric 110bcd interface
105 CRANKSET 2X12sRecommended

Shimano

105 CRANKSET 2X12s

  • Both use the 4-bolt asymmetric 110bcd interface
CLARIS CRANKSET 2X8sRecommended

Shimano

CLARIS CRANKSET 2X8s

  • Both use the 4-bolt asymmetric 110bcd interface
CLARIS CRANKSET 3X8sRecommended

Shimano

CLARIS CRANKSET 3X8s

  • Both are 110mm BCD
CLARIS CRANKSET WITH CHAIN GUARD 2X8sRecommended

Shimano

CLARIS CRANKSET WITH CHAIN GUARD 2X8s

  • Both use the 4-bolt asymmetric 110bcd interface
CLARIS CRANKSET WITH CHAIN GUARD 3X8sRecommended

Shimano

CLARIS CRANKSET WITH CHAIN GUARD 3X8s

  • Both are 110mm BCD
CUES 2-PIECE CRANKSET 1x11/10/9s (FC-U6030-1)Recommended

Shimano

CUES 2-PIECE CRANKSET 1x11/10/9s (FC-U6030-1)

  • Both use the 4-bolt asymmetric 110bcd interface
CUES 2-PIECE CRANKSET 2x10/9sRecommended

Shimano

CUES 2-PIECE CRANKSET 2x10/9s

  • Both use the 4-bolt asymmetric 110bcd interface
CUES CRANKSET HOLLOWTECH II 1x11/10/9sRecommended

Shimano

CUES CRANKSET HOLLOWTECH II 1x11/10/9s

  • Both use the 4-bolt asymmetric 110bcd interface
CUES CRANKSET HOLLOWTECH II 2x10/9sRecommended

Shimano

CUES CRANKSET HOLLOWTECH II 2x10/9s

  • Both use the 4-bolt asymmetric 110bcd interface
CUES HOLLOWTECH II CRANKSET 2X11s U6000Recommended

Shimano

CUES HOLLOWTECH II CRANKSET 2X11s U6000

  • Both use the 4-bolt asymmetric 110bcd interface
DURA-ACE CRANKSET 2X11sRecommended

Shimano

DURA-ACE CRANKSET 2X11s

  • Both use the 4-bolt asymmetric 110bcd interface
DURA-ACE CRANKSET 2X12sRecommended

Shimano

DURA-ACE CRANKSET 2X12s

  • Both use the 4-bolt asymmetric 110bcd interface
GRX CRANKSET 1X11s RX600Recommended

Shimano

GRX CRANKSET 1X11s RX600

  • Both use the 4-bolt asymmetric 110bcd interface

Frequently Asked Questions

What fits Shimano ULTEGRA 50T Chainring for FC-08?

On this page we list cranksets this chainring fits. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano ULTEGRA 50T Chainring for FC-08?

No. Shimano ULTEGRA 50T Chainring for FC-08 is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.