FSA GOSSAMER PRO AGX+ 1X M/EXO CRANCKSET Compatibility Guide
Quick Verdict
FSA GOSSAMER PRO AGX+ 1X M/EXO CRANCKSET is a FSA crankset. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.
Bottom brackets for this crankset
20 total resultsRecommended
20Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
FSA
BB ck M/EXO 24mm carbon to BB30 68mm Ceramic bearing
What we checked
- Both use a 19mm megaexo spindle
FSA
Mega Exo Comet crank to 68/73mm frame
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo (19mm)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo and 24 (BB30, 230-6024)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo and 24 (BB30, 230-6025)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo and 24 (BB86)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo and 24 (BBRight)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo and 24 (PF30)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo Comet crank to BSA 100mm
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo crank
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo crank to PF30 68mm frame
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo crank to PF30 73mm frame
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo cranks to press fit BB86 frame
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo Gamma Drive crank to BSA frame
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo GOSSAMER crank to BSA frame Di2 compatible
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo K-Force crank to BSA 68/73mm frame
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo K-Force crank to BSA frame with ceramic bearings
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo MTB crank to press fit BB92 frame (24mm)
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo MTB crank to press fit BB92 frame with ceramic bearings
What we checked
- Both use a 19mm megaexo spindle
FSA
MegaExo Omega crank to BSA frame Di2 compatible
What we checked
- Both use a 19mm megaexo spindle
Frequently Asked Questions
What fits FSA GOSSAMER PRO AGX+ 1X M/EXO CRANCKSET?
On this page we list bottom brackets for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Related compatibility guides
- Shimano DEORE XT CRANKSET 1X11s Compatibility
- Shimano DEORE XT CRANKSET 48.8 MM CHAIN LINE 2X12s Compatibility
- Shimano CUES CRANKSET 2X11/10/9s Compatibility
- Shimano MTB CRANKSET 2X8/7s (FC-M315-2) Compatibility
- Shimano DEORE CRANKSET 1X12s Compatibility
- Shimano TIAGRA CRANKSET 2x11s Compatibility
- Shimano XTR CRANKSET 168 MM Q-FACTOR 52 MM CHAIN LINE 1X12s Compatibility
- Shimano CUES 2-PIECE CRANKSET 1X11/10/9s (FC-U6000-1) Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.