Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s Compatibility Guide

Quick Verdict

Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s is a Shimano front derailleur. It is a 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds11

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Cranksets for this front derailleur

20 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Road

Shimano

TIAGRA CRANKSET 2x11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

105 CRANKSET 2X11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

105 CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

CLARIS CRANKSET 2X8s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 50/34 rings are within this derailleur's 16T capacity

Shimano

CLARIS CRANKSET WITH CHAIN GUARD 2X8s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 50/34 rings are within this derailleur's 16T capacity

Shimano

DURA-ACE CRANKSET 2X11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

DURA-ACE CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

SORA CRANKSET 2X9s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 50/34 rings are within this derailleur's 16T capacity

Shimano

TIAGRA CRANKSET 2X10s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

ULTEGRA CRANKSET 2X11s (FC-08)

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

ULTEGRA CRANKSET 2X11s (FC-R8000)

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 53/46 rings are within this derailleur's 16T capacity

Shimano

ULTEGRA CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

City / Trekking

Shimano

ALFINE CRANKSET WITH CHAIN GUARD

What we checked

Both are Shimano drivetrain parts
The 45/39 rings are within this derailleur's 16T capacity

General

Shimano

CRANKSET 2X11s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

CRANKSET 2X12s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 50/34 rings are within this derailleur's 16T capacity

Shimano

CRANKSET 2X8s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline

Shimano

CUES 2-PIECE CRANKSET 1X11/10/9s (FC-U6000-1)

What we checked

Both are Shimano drivetrain parts
The 42/30 rings are within this derailleur's 16T capacity

Shimano

CUES CRANKSET 1X11/10/9s

What we checked

Both are Shimano drivetrain parts
The 42/30 rings are within this derailleur's 16T capacity

Shimano

ESSA CRANKSET 8/7s (FC-U2000-1)

What we checked

Both are Shimano drivetrain parts
The 40/32 rings are within this derailleur's 16T capacity

Shimano

TOURNEY CRANKSET 2X8/7s

What we checked

Both are Shimano drivetrain parts
Both are built around a 43.5 mm chainline
The 50/34 rings are within this derailleur's 16T capacity

Frequently Asked Questions

What fits Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s?

On this page we list cranksets for this front derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s?

No. Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.