Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s
Front Derailleur
Specifications
- Manufacturer
- Shimano
- Name
- TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s
- Series
- R4000
- MPN
- FD-R4000-B
- Groupset
- Tiagra
- Rear Speeds
- 11
- Chainline (mm)
- 43.5
- Total Capacity (T)
- 16
Compatibility
Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s is a Shimano front derailleur. It is a 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Cranksets for this front derailleur20
Shares a standardShimano
TIAGRA CRANKSET 2x11s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
105 CRANKSET 2X11s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
105 CRANKSET 2X12s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
ALFINE CRANKSET WITH CHAIN GUARD
- Both are Shimano drivetrain parts
- The 45/39 rings are within this derailleur's 16T capacity
Shares a standardShimano
CLARIS CRANKSET 2X8s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
CLARIS CRANKSET WITH CHAIN GUARD 2X8s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
CRANKSET 2X11s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
CRANKSET 2X12s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
CRANKSET 2X8s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
CUES 2-PIECE CRANKSET 1X11/10/9s (FC-U6000-1)
- Both are Shimano drivetrain parts
- The 42/30 rings are within this derailleur's 16T capacity
Shares a standardShimano
CUES CRANKSET 1X11/10/9s
- Both are Shimano drivetrain parts
- The 42/30 rings are within this derailleur's 16T capacity
Shares a standardShimano
DURA-ACE CRANKSET 2X11s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
DURA-ACE CRANKSET 2X12s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
ESSA CRANKSET 8/7s (FC-U2000-1)
- Both are Shimano drivetrain parts
- The 40/32 rings are within this derailleur's 16T capacity
Shares a standardShimano
SORA CRANKSET 2X9s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
TIAGRA CRANKSET 2X10s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
TOURNEY CRANKSET 2X8/7s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
ULTEGRA CRANKSET 2X11s (FC-08)
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
ULTEGRA CRANKSET 2X11s (FC-R8000)
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Shares a standardShimano
ULTEGRA CRANKSET 2X12s
- Both are Shimano drivetrain parts
- Both are built around a 43.5 mm chainline
Frequently Asked Questions
What fits Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s?
On this page we list cranksets for this front derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s?
No. Shimano TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2x11s is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.