SRAM RED eTap Rear Derailleur Compatibility Guide
Quick Verdict
SRAM RED eTap Rear Derailleur is a SRAM rear derailleur. It is a 11-speed component. It uses axs shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.
Chains for this derailleur
10 total resultsRecommended
5Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
General
SRAM
PC-1110 Chain
What we checked
- Both are 11-speed
- Both use the standard standard
SRAM
PC-1130 Chain
What we checked
- Both are 11-speed
- Both use the standard standard
SRAM
PC-1170 Chain
What we checked
- Both are 11-speed
- Both use the standard standard
MTB
SRAM
PC-X1 Chain
What we checked
- Both are 11-speed
- Both use the standard standard
Road / Gravel
SRAM
RED 22 Chain
What we checked
- Both are 11-speed
- Both use the standard standard
Mechanically compatible
5Every interface this pairing depends on was checked and matched, but the parts come from different ranges, so expect to confirm shift feel and finish yourself.
FSA
K-FORCE LIGHT 11 SPEED CHAIN
What we checked
- Both are 11-speed
FSA
K-FORCE LIGHT MTB 11 SPEED CHAIN
What we checked
- Both are 11-speed
FSA
K-Force WE 11 SPEED CHAIN
What we checked
- Both are 11-speed
FSA
SF11 E-BIKE 11 SPEED CHAIN
What we checked
- Both are 11-speed
FSA
Team Issue Chain
What we checked
- Both are 11-speed
Frequently Asked Questions
What fits SRAM RED eTap Rear Derailleur?
On this page we list chains for this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with SRAM RED eTap Rear Derailleur?
No. SRAM RED eTap Rear Derailleur is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Related compatibility guides
- Shimano ALIVIO REAR DERAILLEUR 9s Compatibility
- Shimano XTR Di2 DERAILLEUR LONG CAGE 11s Compatibility
- Shimano DEORE XT Di2 REAR DERAILLEUR MEDIUM CAGE11s Compatibility
- Shimano SLX REAR DERAILLEUR LONG CAGE 3X10s Compatibility
- Shimano TOURNEY REAR DERAILLEUR 1X6/7s Compatibility
- Shimano DEORE XT REAR DERAILLEUR 1X12s (RD-M8100-GS) Compatibility
- Shimano XTR REAR DERAILLEUR LONG CAGE 2X12s Compatibility
- Shimano SLX REAR DERAILLEUR 2X12s Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.