SRAM RED eTap AXS Front Derailleur Compatibility Guide

Quick Verdict

SRAM RED eTap AXS Front Derailleur is a SRAM front derailleur. It is a 12-speed component. It uses axs shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds12

Shiftingaxs

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Cranksets for this front derailleur

14 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

SRAM

Force 22 Crankset

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force AXS Power Meter

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force AXS Power Meter Crankset

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force Crankarm Assembly (FC-FRC-ASSY-E1)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force Crankset (FC-FRC-D2)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force Crankset (FC-FRC-E1)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

🚲

SRAM

RED 22 Crankset

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

RED AXS Power Meter

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

RED Crankset

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival 22 Crankset

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival AXS Power Meter

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival Crankarm Assembly

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival Crankset (FC-RIV-D1)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival Crankset (FC-RIV-E1)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

Shifters that drive this derailleur

4 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

SRAM

Apex AXS Shift-Brake Lever

What we checked

Both use axs actuation
Both are SRAM drivetrain parts

SRAM

Force AXS Shift-Brake Lever

What we checked

Both use axs actuation
Both are SRAM drivetrain parts

SRAM

RED AXS Shift-Brake Lever

What we checked

Both use axs actuation
Both are SRAM drivetrain parts

SRAM

Rival AXS Shift-Brake Lever

What we checked

Both use axs actuation
Both are SRAM drivetrain parts

Frequently Asked Questions

What fits SRAM RED eTap AXS Front Derailleur?

On this page we list cranksets for this front derailleur, shifters that drive this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with SRAM RED eTap AXS Front Derailleur?

No. SRAM RED eTap AXS Front Derailleur is a 12-speed component and needs a 12-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.