SRAM Rival 22 Crankset Compatibility Guide

Quick Verdict

SRAM Rival 22 Crankset is a SRAM crankset. It is a 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds11

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Chains for this crankset

13 total results

Front derailleurs for this crankset

9 total results

Shares a standard

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

SRAM

Force 22 Yaw Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force AXS Front Derailleur (FD-FRC-E-D2)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Force AXS Front Derailleur (FD-FRC-E-E1)

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

RED AXS Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

RED eTap AXS Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

RED Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival 22 Yaw Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival AXS Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

SRAM

Rival eTap AXS Front Derailleur

What we checked

Both are set up for 2x
Both are SRAM drivetrain parts
Both are built around a 45 mm chainline

Bottom brackets for this crankset

20 total results

Frequently Asked Questions

What fits SRAM Rival 22 Crankset?

On this page we list chains for this crankset, front derailleurs for this crankset, bottom brackets for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with SRAM Rival 22 Crankset?

No. SRAM Rival 22 Crankset is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.

SRAM Rival 22 Crankset Compatibility Guide

Quick Verdict

Chains for this crankset

Recommended

General

MTB

Road / Gravel

Front derailleurs for this crankset

Shares a standard

Bottom brackets for this crankset

Recommended

Frequently Asked Questions

What fits SRAM Rival 22 Crankset?

Can I use a higher or lower speed chain with SRAM Rival 22 Crankset?

Related compatibility guides

Build with this part