Shimano TOURNEY CRANKSET 2X8/7s

Crankset

TOURNEY CRANKSET 2X8/7s

Specifications

Manufacturer
Shimano
Name
TOURNEY CRANKSET 2X8/7s
Series
A070
MPN
FC-A070
Groupset
Tourney
Rear Speeds
7, 8
Front Speeds (chainrings)
2[1]
Drivetrain Brand
Shimano
Chainring Sizes
50, 34[2]
Crank Length (mm)
165, 170
Spindle Interface
Square Taper JIS
Chainring Mount
Riveted Non Replaceable
Chainline (mm)
43.5[2]
Compatible Chain Standards
Shimano HG (Hyperglide)[2]
Sources
  1. [1] AI-extracted, not yet checked against a named source (added 9 Feb 2026): Front Speeds (chainrings)
  2. [2] productinfo.shimano.com, checked 7 Aug 2026: Chainring Sizes, Chainline (mm), Compatible Chain Standards

Compatibility

Shimano TOURNEY CRANKSET 2X8/7s is a Shimano crankset. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Bottom brackets for this crankset10

TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKETRecommended

Shimano

TOURNEY CARTRIDGE E-TYPE BOTTOM BRACKET

  • Both use a square taper jis spindle
TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASERecommended

Shimano

TOURNEY TY CARTRIDGE BOTTOM BRACKET FOR CHAIN CASE

  • Both use a square taper jis spindle
CARTRIDGE BOTTOM BRACKETMechanically compatible

Shimano

CARTRIDGE BOTTOM BRACKET

  • Both use a square taper jis spindle
JIS Square Taper (BSA / JIS)Mechanically compatible

Token

JIS Square Taper (BSA / JIS)

  • Both use a square taper jis spindle
JIS Square Taper (ITA / JIS)Mechanically compatible

Token

JIS Square Taper (ITA / JIS)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN101-K)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN101)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN101)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300-E)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300-K)

  • Both use a square taper jis spindle
SQUARE TYPE BOTTOM BRACKET (BB-UN300)Mechanically compatible

Shimano

SQUARE TYPE BOTTOM BRACKET (BB-UN300)

  • Both use a square taper jis spindle

Front derailleurs for this crankset20

TOURNEY A070 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X7sRecommended

Shimano

TOURNEY A070 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X7s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
105 Di2 FRONT DERAILLEUR 2X12sMechanically compatible

Shimano

105 Di2 FRONT DERAILLEUR 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
105 FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X11sMechanically compatible

Shimano

105 FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
105 FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X12sMechanically compatible

Shimano

105 FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11sMechanically compatible

Shimano

105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X12sMechanically compatible

Shimano

105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CLARIS FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X8sMechanically compatible

Shimano

CLARIS FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X8s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
CLARIS FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X8sMechanically compatible

Shimano

CLARIS FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X8s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DURA-ACE Di2 FRONT DERAILLEUR 2X11sMechanically compatible

Shimano

DURA-ACE Di2 FRONT DERAILLEUR 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DURA-ACE Di2 FRONT DERAILLEUR 2X12sMechanically compatible

Shimano

DURA-ACE Di2 FRONT DERAILLEUR 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DURA-ACE FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X11sMechanically compatible

Shimano

DURA-ACE FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
DURA-ACE FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11sMechanically compatible

Shimano

DURA-ACE FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
SORA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X9sMechanically compatible

Shimano

SORA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
SORA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9sMechanically compatible

Shimano

SORA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
TIAGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X10sMechanically compatible

Shimano

TIAGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10sMechanically compatible

Shimano

TIAGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ULTEGRA Di2 FRONT DERAILLEUR 2X11sMechanically compatible

Shimano

ULTEGRA Di2 FRONT DERAILLEUR 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ULTEGRA Di2 FRONT DERAILLEUR 2X12sMechanically compatible

Shimano

ULTEGRA Di2 FRONT DERAILLEUR 2X12s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ULTEGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X11sMechanically compatible

Shimano

ULTEGRA FRONT DERAILLEUR (BRAZED-ON MOUNT) 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts
ULTEGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11sMechanically compatible

Shimano

ULTEGRA FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s

  • Both are set up for 2x
  • Both are Shimano drivetrain parts

Frequently Asked Questions

What fits Shimano TOURNEY CRANKSET 2X8/7s?

On this page we list bottom brackets for this crankset, front derailleurs for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.