Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s
Front Derailleur

Specifications
- Manufacturer
- Shimano
- Name
- 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s
- Series
- R7000
- MPN
- FD-R7000-B
- Groupset
- 105
- Rear Speeds
- 11
- Front Speeds
- 2
- Drivetrain Brand
- Shimano
- Shifting Type
- Cable
- Chainline (mm)
- 43.5
- Total Capacity (T)
- 16
- Weight (g)
- 111
Compatibility
Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s is a Shimano front derailleur. It is a 11-speed component. It uses cable shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.
Shifters that drive this derailleur20
RecommendedShimano
105 DUAL CONTROL LEVER RIM BRAKE 11s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
105 DUAL CONTROL LEVER RIM BRAKE 2X11s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
105 HYDRAULIC DISC BRAKE DUAL CONTROL LEVER 11s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
105 HYDRAULIC DISC BRAKE DUAL CONTROL LEVER 2X11s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
105 HYDRAULIC DISC BRAKE DUAL CONTROL LEVER FOR SMALL HANDS 2X11s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
105 DUAL CONTROL LEVER 2X12s (Left)
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
105 DUAL CONTROL LEVER 2X12s (Right)
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
ACERA SHIFT LEVER LEFT 2X9s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
ALIVIO SHIFT LEVER LEFT 2X9s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CLARIS DUAL CONTROL LEVER 2X8s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CLARIS DUAL CONTROL LEVER 8s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CLARIS LEFT SHIFT LEVER FLAT BAR ROAD 2X8s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CLARIS LEFT SHIFT/BRAKE LEVER FLAT BAR ROAD 2X8s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CLARIS RIGHT SHIFT LEVER FLAT BAR ROAD 8s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CUES MECHANICAL DUAL CONTROL LEVER 9s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CUES MECHANICAL DUAL CONTROL LEVER FOR DOUBLE
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CUES MONO LEFT SHIFTER CLAMP BAND 2X11/10s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CUES MONO LEFT SHIFTER CLAMP BAND 2X11s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CUES MONO LEFT SHIFTER CLAMP BAND 2X9s
- Both are set up for 2x
- Both use cable actuation
RecommendedShimano
CUES MONO LEFT SHIFTER I-SPEC II 2X11s
- Both are set up for 2x
- Both use cable actuation
Cranksets for this front derailleur16
RecommendedShimano
CLARIS CRANKSET 2X8s
- Both are set up for 2x
- Both are Shimano drivetrain parts
RecommendedShimano
CLARIS CRANKSET WITH CHAIN GUARD 2X8s
- Both are set up for 2x
- Both are Shimano drivetrain parts
RecommendedShimano
CRANKSET 2X12s
- Both are set up for 2x
- Both are Shimano drivetrain parts
RecommendedShimano
SORA CRANKSET 2X9s
- Both are set up for 2x
- Both are Shimano drivetrain parts
RecommendedShimano
TOURNEY CRANKSET 2X8/7s
- Both are set up for 2x
- Both are Shimano drivetrain parts
RecommendedShimano
ULTEGRA CRANKSET 2X11s (FC-R8000)
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
105 CRANKSET 2X11s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
105 CRANKSET 2X12s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
CRANKSET 2X11s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
CRANKSET 2X8s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
DURA-ACE CRANKSET 2X11s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
DURA-ACE CRANKSET 2X12s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
TIAGRA CRANKSET 2X10s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
TIAGRA CRANKSET 2x11s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
ULTEGRA CRANKSET 2X11s (FC-08)
- Both are set up for 2x
- Both are Shimano drivetrain parts
Shares a standardShimano
ULTEGRA CRANKSET 2X12s
- Both are set up for 2x
- Both are Shimano drivetrain parts
Frequently Asked Questions
What fits Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s?
On this page we list shifters that drive this derailleur, cranksets for this front derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s?
No. Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s work with electronic shifting like Di2 or AXS?
No. Shimano 105 FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11s is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.