Shimano CUES Di2 REAR DERAILLEUR 1x10s U8000 Compatibility Guide

Quick Verdict

Shimano CUES Di2 REAR DERAILLEUR 1x10s U8000 is a Shimano rear derailleur. It is a 10-speed component. It uses di2 shifting. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds10
Shiftingdi2

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Chains for this derailleur

4 total results

Recommended

2

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

MTB

CN-HG54 DEORE MTB CHAIN 10s

Shimano

CN-HG54 DEORE MTB CHAIN 10s

What we checked
  • Both are 10-speed
  • Both use the shimano hg standard

General

CN-HG95 HG-X CHAIN 10s

Shimano

CN-HG95 HG-X CHAIN 10s

What we checked
  • Both are 10-speed
  • Both use the shimano hg standard

Mechanically compatible

2

Every interface this pairing depends on was checked and matched, but the parts come from different ranges, so expect to confirm shift feel and finish yourself.

K-FORCE LIGHT 10 SPEED CHAIN

FSA

K-FORCE LIGHT 10 SPEED CHAIN

What we checked
  • Both are 10-speed
Team Issue Chain

FSA

Team Issue Chain

What we checked
  • Both are 10-speed

Shifters that drive this derailleur

2 total results

Recommended

1

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

Di2 SHIFT SWITCH

Shimano

Di2 SHIFT SWITCH

What we checked
  • Both are 10-speed
  • Both use di2 actuation
  • Both are Shimano drivetrain parts

Shares a standard

1

One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Di2 REMOTE SATELLITE SHIFTER (CLIMBING SWITCH)

Shimano

Di2 REMOTE SATELLITE SHIFTER (CLIMBING SWITCH)

What we checked
  • Both use di2 actuation
  • Both are Shimano drivetrain parts

Cassettes this derailleur can wrap

3 total results

Recommended

3

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

MTB

DEORE HG CASSETTE 10s

Shimano

DEORE HG CASSETTE 10s

What we checked
  • Both are 10-speed
  • Both are Shimano drivetrain parts
  • Both use the shimano hg standard

General

HG CASSETTE 10s (CS-HG50-10)

Shimano

HG CASSETTE 10s (CS-HG50-10)

What we checked
  • Both are 10-speed
  • Both are Shimano drivetrain parts
  • Both use the shimano hg standard
HG CASSETTE 10s (CS-HG500-10)

Shimano

HG CASSETTE 10s (CS-HG500-10)

What we checked
  • Both are 10-speed
  • Both are Shimano drivetrain parts
  • Both use the shimano hg standard

Frequently Asked Questions

What fits Shimano CUES Di2 REAR DERAILLEUR 1x10s U8000?

On this page we list chains for this derailleur, shifters that drive this derailleur, cassettes this derailleur can wrap. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano CUES Di2 REAR DERAILLEUR 1x10s U8000?

No. Shimano CUES Di2 REAR DERAILLEUR 1x10s U8000 is a 10-speed component and needs a 10-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.