Shimano CUES REAR DERAILLEUR 10s Compatibility Chart
The rest of the Shimano CUES groupset
Other Shimano CUES parts with a compatibility chart of their own. They are listed because they share the groupset, not because they have been checked against this part. The verified matches are further down the page.
Shifters
- Shimano CUES BRAKE LEVER FOR SINGLE
- Shimano CUES HYDRAULIC DUAL CONTROL LEVER FOR DOUBLE
- Shimano CUES SHIFTER CLAMP BAND 9s (SL-U4010-9R)
- Shimano CUES HYDRAULIC DUAL CONTROL LEVER 11/10s
- Shimano CUES MONO LEFT SHIFTER CLAMP BAND 2X9s
- Shimano CUES SHIFTER I-SPEC II 11s
- Shimano CUES SHIFTER CLAMP BAND 10s
- Shimano CUES SHIFTER CLAMP BAND 9s
- Shimano CUES MECHANICAL DUAL CONTROL LEVER FOR DOUBLE
Front derailleurs
- Shimano CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s
- Shimano CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s
- Shimano CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s
- Shimano CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10s
- Shimano CUES FRONT DERAILLEUR 2x10/9s (CLAMP BAND MOUNT)
Cranksets
Only pairings verified on both parts’ specifications are listed. Confirm with the manufacturer before buying.
Cassettes for this derailleur
3 total resultsShares a standard
3One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Shimano
HG CASSETTE 10s (CS-HG50-10)
What we checked
- Both are 10-speed
- Both are Shimano drivetrain parts
- The cassette's 36T largest cog is within the derailleur's 39T maximum

Shimano
HG CASSETTE 10s (CS-HG500-10)
What we checked
- Both are 10-speed
- Both are Shimano drivetrain parts
- The cassette's 32T largest cog is within the derailleur's 39T maximum

Shimano
LINKGLIDE CASSETTE 10s (CS-LG300-10)
What we checked
- Both are 10-speed
- Both are Shimano drivetrain parts
Shifters that drive this derailleur
7 total resultsRecommended
3Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.
Road / Gravel

Shimano
CUES HYDRAULIC DUAL CONTROL LEVER 11/10s
What we checked
- Both are 10-speed
- Both use cable actuation
- Both are Shimano drivetrain parts
MTB / City

Shimano
CUES SHIFT LEVER SHORT REACH 10s
What we checked
- Both are 10-speed
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
CUES SHIFTER CLAMP BAND 10s
What we checked
- Both are 10-speed
- Both use cable actuation
- Both are Shimano drivetrain parts
Mechanically compatible
3Every interface this pairing depends on was checked and matched, but the parts come from different ranges, so expect to confirm shift feel and finish yourself.
Road / Gravel

Shimano
CUES MECHANICAL DUAL CONTROL LEVER 10s
What we checked
- Both are 10-speed
- Both use cable actuation
- Both are Shimano drivetrain parts
MTB / City

Shimano
DEORE LINKGLIDE SHIFT LEVER RIGHT CLAMP BAND 10s
What we checked
- Both are 10-speed
- Both use cable actuation
- Both are Shimano drivetrain parts

Shimano
TIAGRA SHIFT LEVER FLAT BAR ROAD 3X10s
What we checked
- Both are 10-speed
- Both use cable actuation
- Both are Shimano drivetrain parts
Shares a standard
1One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.

Shimano
CUES SHIFTER CLAMP BAND 10s
What we checked
- Both are 10-speed
- Both are Shimano drivetrain parts
- Both use the Shimano Linkglide 10-speed cable pull
Chains for this derailleur
14 total resultsShares a standard
14One shared specification was confirmed, but we do not hold every spec this pairing depends on. Treat it as a starting point, not a verdict, and check the remaining interfaces before buying.
MTB

Shimano
CN-HG54 DEORE MTB CHAIN 10s
What we checked
- Both are 10-speed
General

Shimano
CN-HG95 HG-X CHAIN 10s
What we checked
- Both are 10-speed

KMC
DLC 10
What we checked
- Both are 10-speed

KMC
e10
What we checked
- Both are 10-speed

KMC
eGlide
What we checked
- Both are 10-speed

FSA
K-FORCE LIGHT 10 SPEED CHAIN
What we checked
- Both are 10-speed

SRAM
PC-1031 Chain
What we checked
- Both are 10-speed

SRAM
PC-1051 Chain
What we checked
- Both are 10-speed

SRAM
PC-1071 Chain
What we checked
- Both are 10-speed

SRAM
PC-1091R Chain
What we checked
- Both are 10-speed

FSA
Team Issue Chain
What we checked
- Both are 10-speed

KMC
X10
What we checked
- Both are 10-speed

KMC
X10SL
What we checked
- Both are 10-speed

KMC
XGlide
What we checked
- Both are 10-speed
Frequently Asked Questions
What fits Shimano CUES REAR DERAILLEUR 10s?
On this page we list cassettes for this derailleur, shifters that drive this derailleur, chains for this derailleur. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.
Can I use a higher or lower speed chain with Shimano CUES REAR DERAILLEUR 10s?
No. Shimano CUES REAR DERAILLEUR 10s is a 10-speed component and needs a 10-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.
Does Shimano CUES REAR DERAILLEUR 10s work with electronic shifting like Di2 or AXS?
No. Shimano CUES REAR DERAILLEUR 10s is mechanical, cable-actuated. Electronic groups use internal motors and proprietary signalling, so there is no mechanical or electrical path between the two.
Related compatibility guides
- Shimano ALIVIO REAR DERAILLEUR 9s Compatibility
- Shimano XTR Di2 DERAILLEUR LONG CAGE 11s Compatibility
- Shimano DEORE XT Di2 REAR DERAILLEUR MEDIUM CAGE11s Compatibility
- Shimano SLX REAR DERAILLEUR LONG CAGE 3X10s Compatibility
- Shimano TOURNEY REAR DERAILLEUR 1X6/7s Compatibility
- Shimano DEORE XT REAR DERAILLEUR 1X12s (RD-M8100-GS) Compatibility
- Shimano XTR REAR DERAILLEUR LONG CAGE 2X12s Compatibility
- Shimano SLX REAR DERAILLEUR 2X12s Compatibility
Build with this part
Start a build with this part pre-selected to verify full system compatibility and calculate total weight.
Open in BuilderThe builder re-checks the whole build every time you add a part.