Shimano CUES HOLLOWTECH II CRANKSET 2X11s U8000 Compatibility Guide

Quick Verdict

Shimano CUES HOLLOWTECH II CRANKSET 2X11s U8000 is a Shimano crankset. It is a 11-speed component. Everything listed below was matched on a specification we hold for both parts: the interface each pairing actually depends on, such as freehub body, speed count, actuation or mounting standard. Where we could not verify that interface, the part is left out rather than assumed to fit.

Speeds11

How this list is built: a part is listed only when we hold the specification that decides the pairing for bothparts and those specifications match: the freehub body for a cassette and a wheel, the mounting interface for a chainring and a crankset, and so on. Each card shows exactly what was compared. Where we do not hold that specification the part is left out rather than assumed to fit, so this list is deliberately incomplete rather than speculative. Always confirm against the manufacturer’s own compatibility documentation before buying.

Front derailleurs for this crankset

15 total results

Recommended

15

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

General

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U8000

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U8000

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

Shimano

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s

Shimano

CUES SIDE SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X10/9s

Shimano

CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X10/9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10s

Shimano

CUES SIDE SWING FRONT DERAILLEUR (DIRECT MOUNT) 2X11/10s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X10/9s

Shimano

CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X10/9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X11/10s

Shimano

CUES SIDE SWING FRONT DERAILLEUR (E-TYPE WITHOUT BOTTOM BRACKET PLATE MOUNT) 2X11/10s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X10/9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U6000

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X11/10s U6000

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9s

Shimano

CUES TOP SWING FRONT DERAILLEUR (CLAMP BAND MOUNT) 2X9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X8/7/6s

Shimano

TOURNEY TY FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X8/7/6s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline

MTB

ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 2X9s (FD-M3120-M)

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (CLAMP BAND) 2X9s (FD-M3120-M)

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
ALIVIO FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 2X9s

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (DIRECT MOUNT) 2X9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
ALIVIO FRONT DERAILLEUR SIDE SWING (E-TYPE MOUNT) 2X9s

Shimano

ALIVIO FRONT DERAILLEUR SIDE SWING (E-TYPE MOUNT) 2X9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline
ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9s

Shimano

ALTUS FRONT DERAILLEUR TOP SWING (CLAMP BAND MOUNT) 2X9s

What we checked
  • Both are set up for 2x
  • Both are Shimano drivetrain parts
  • Both are built around a 48.8 mm chainline

Chainrings that fit this crankset

20 total results

Recommended

20

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

Chainring 40T for FC-U8000-1

Shimano

Chainring 40T for FC-U8000-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 42T for FC-U8000-1

Shimano

Chainring 42T for FC-U8000-1

What we checked
  • Both use the 4-bolt 96bcd interface
AFTERBURNER MTB ABS

FSA

AFTERBURNER MTB ABS

What we checked
  • Both are 96mm BCD
AFTERBURNER MTB modular

FSA

AFTERBURNER MTB modular

What we checked
  • Both are 96mm BCD
Chainring 22T for FC-U6000-2/FC-U6000-2B

Shimano

Chainring 22T for FC-U6000-2/FC-U6000-2B

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 30T for FC-M5100-1

Shimano

Chainring 30T for FC-M5100-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 30T for FC-MT511-1/FC-MT510-1

Shimano

Chainring 30T for FC-MT511-1/FC-MT510-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 30T for FC-U6000-1

Shimano

Chainring 30T for FC-U6000-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 32T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/CR-EM800

Shimano

Chainring 32T for FC-E8000/FC-E8050/FC-M8050 (w/o CG)/CR-EM800

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 32T for FC-M5100-1

Shimano

Chainring 32T for FC-M5100-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 32T for FC-MT511-1/FC-MT510-1

Shimano

Chainring 32T for FC-MT511-1/FC-MT510-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 32T for FC-U6000-1

Shimano

Chainring 32T for FC-U6000-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 32T for FC-U8000-2

Shimano

Chainring 32T for FC-U8000-2

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 34T for FC-M6000-2

Shimano

Chainring 34T for FC-M6000-2

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 34T for FC-M8000-2/FC-M8000-B2

Shimano

Chainring 34T for FC-M8000-2/FC-M8000-B2

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 34T for FC-MT610/FC-MT510-1

Shimano

Chainring 34T for FC-MT610/FC-MT510-1

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 36T for FC-M4100-2/FC-M4100-B2

Shimano

Chainring 36T for FC-M4100-2/FC-M4100-B2

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 36T for FC-M5100-2/FC-M5100-B2

Shimano

Chainring 36T for FC-M5100-2/FC-M5100-B2

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 36T for FC-M6000-2/FC-M6000-B2/FC-MT500-2/FC-MT500-B2

Shimano

Chainring 36T for FC-M6000-2/FC-M6000-B2/FC-MT500-2/FC-MT500-B2

What we checked
  • Both use the 4-bolt 96bcd interface
Chainring 36T for FC-M8000-2/FC-M8000-B2

Shimano

Chainring 36T for FC-M8000-2/FC-M8000-B2

What we checked
  • Both use the 4-bolt 96bcd interface

Bottom brackets for this crankset

20 total results

Recommended

20

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

386EVO ABEC-3 BB for 24mm (Shimano) Cranks

Wheels Manufacturing

386EVO ABEC-3 BB for 24mm (Shimano) Cranks

What we checked
  • Both use a 24mm spindle
386EVO Angular Contact BB for 24mm (Shimano) Cranks

Wheels Manufacturing

386EVO Angular Contact BB for 24mm (Shimano) Cranks

What we checked
  • Both use a 24mm spindle
878

Token

878

What we checked
  • Both use a 24mm spindle
BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)

Wheels Manufacturing

BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano)

What we checked
  • Both use a 24mm spindle
BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)

Wheels Manufacturing

BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano)

What we checked
  • Both use a 24mm spindle
BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)

Wheels Manufacturing

BB30 Outboard Ceramic Hybrid BB for 24mm Cranks (Shimano)

What we checked
  • Both use a 24mm spindle
BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)

Wheels Manufacturing

BB30 Outboard ZERØ Ceramic BB for 24mm Cranks (Shimano)

What we checked
  • Both use a 24mm spindle
BB30AR

Token

BB30AR

What we checked
  • Both use a 24mm spindle
BB3724

Token

BB3724

What we checked
  • Both use a 24mm spindle
BB38624PS

Token

BB38624PS

What we checked
  • Both use a 24mm spindle
BB386PS

Token

BB386PS

What we checked
  • Both use a 24mm spindle
BB4124PS

Token

BB4124PS

What we checked
  • Both use a 24mm spindle
BB46BR24

Token

BB46BR24

What we checked
  • Both use a 24mm spindle
BB47R24

Token

BB47R24

What we checked
  • Both use a 24mm spindle
BB47V24

Token

BB47V24

What we checked
  • Both use a 24mm spindle
BB841PS

Token

BB841PS

What we checked
  • Both use a 24mm spindle
BB841T-41

Token

BB841T-41

What we checked
  • Both use a 24mm spindle
BB841T-42

Token

BB841T-42

What we checked
  • Both use a 24mm spindle
BB841T-46

Token

BB841T-46

What we checked
  • Both use a 24mm spindle
BB86 Bottom Bracket (Shimano 24mm)

Cybrei

BB86 Bottom Bracket (Shimano 24mm)

What we checked
  • Both use a 24mm spindle

Chains for this crankset

8 total results

Recommended

8

Every interface this pairing depends on was checked and matched, and the two parts are sold as part of the same system.

CN-HG601-11 LINKGLIDE, HG CHAIN 11s

Shimano

CN-HG601-11 LINKGLIDE, HG CHAIN 11s

What we checked
  • Both are 11-speed
CN-HG701-11 LINKGLIDE, HG CHAIN 11s

Shimano

CN-HG701-11 LINKGLIDE, HG CHAIN 11s

What we checked
  • Both are 11-speed
CN-LG500 LINKGLIDE CHAIN 10/11s

Shimano

CN-LG500 LINKGLIDE CHAIN 10/11s

What we checked
  • Both are 11-speed
K-FORCE LIGHT 11 SPEED CHAIN

FSA

K-FORCE LIGHT 11 SPEED CHAIN

What we checked
  • Both are 11-speed
K-FORCE LIGHT MTB 11 SPEED CHAIN

FSA

K-FORCE LIGHT MTB 11 SPEED CHAIN

What we checked
  • Both are 11-speed
K-Force WE 11 SPEED CHAIN

FSA

K-Force WE 11 SPEED CHAIN

What we checked
  • Both are 11-speed
SF11 E-BIKE 11 SPEED CHAIN

FSA

SF11 E-BIKE 11 SPEED CHAIN

What we checked
  • Both are 11-speed
Team Issue Chain

FSA

Team Issue Chain

What we checked
  • Both are 11-speed

Frequently Asked Questions

What fits Shimano CUES HOLLOWTECH II CRANKSET 2X11s U8000?

On this page we list front derailleurs for this crankset, chainrings that fit this crankset, bottom brackets for this crankset, chains for this crankset. Each listing was matched on a specification we hold for both parts; anything we could not verify is omitted rather than assumed to fit.

Can I use a higher or lower speed chain with Shimano CUES HOLLOWTECH II CRANKSET 2X11s U8000?

No. Shimano CUES HOLLOWTECH II CRANKSET 2X11s U8000 is a 11-speed component and needs a 11-speed chain. Chains for different speed counts have different external widths and inner-plate profiles, which causes poor shifting or interference with the neighbouring sprockets.

Related compatibility guides

Build with this part

Start a build with this part pre-selected to verify full system compatibility and calculate total weight.

Open in Builder

The builder re-checks the whole build every time you add a part.